Related Manuals for Orava RR-41
Summary of Contents for Orava RR-41
- Page 1 Bluetooth HiFi turntable player Instruction manual RR-41 Read this manual carefully before using the device and keep it for future reference. 2021 ORAVA ©...
-
Page 2: General Safety Instructions And Warnings
Orava electrical devices are manufactured in accordance with the knowl- edge of the current state of technology and recognized safety and technical rules. Nevertheless, incorrect and unprofessional use or use contrary to the intended purpose may create a risk of injury or endanger the life of the user or a third party, resp. - Page 3 • Keep the instruction manual as close to the device as possible throughout its service life. Always keep the instruction manual together with the device for future use and use by new users. • Use the device only for the intended purpose and in the manner specified by the manufacturer.
- Page 4 1.3 Electrical safety • Before connecting the device to the power supply for the first time, make sure that the voltage on the device label corresponds to that of the household electrical socket. • The electric device is designed to power from 1/N/PE ~ 230 V 50 Hz. •...
- Page 5 • Do not bend, crush or otherwise expose the power cord of the device to mechanical stress or external heat sources. Damage to the power cord may result in electric shock. • When the power cord is damaged, disconnect the device from the mains and do not use it again.
- Page 6 1.5 Cleaning, maintenance and repairs • Observe the normal user cleaning and maintenance of the device in the recommended way. Do not use solvents or harsh cleaners for cleaning. Pollution and visible stains from finger contact, respectively. The hands can be cleaned using detergent detergents specially designed to clean household devices.
- Page 7 2. Special Safety Instructions. Read carefully! Electrical equipment is designed and manufactured in such a way as to allow for safe operation and use by persons without a professional qualifi- cation. Despite all the measures taken by the manufacturer to ensure safe use, handling and use, it carries with it certain residual risks and associa- ted potential hazards.
- Page 8 Check/Commissioning • We recommend performing both initial and subsequent regular device inspections. • Never use the device if it is incomplete, damaged, or any part of it has been damaged during use. • Do not use non-original and incomplete parts of the device and its acces- sories.
- Page 9 • Do not set the audio device (and the remote control if equipped) to places where medical devices are used. Their function may be impaired. for unstable carts, stands or tables, to an uneven, unstable and dirty surface, on the close edge of tables, tables or parts of furniture, near containers with water or other liquids.
- Page 10 • Unplug the device if children or incompetent persons are left unattended near the device. Danger of serious injuries! There is a risk of electric shock! There is a risk of fire! • Do not tie the power cord and signal cables together. Do not wind the cables together.
-
Page 11: Disposal Of Used Electrical And Electronic Equipment
DECLARATION OF CONFORMITY Short text Declaration of Conformity: ORAVA retail 1, a.s. hereby declares that the RR-41 complies with the essential requirements and other relevant conditions of Directive 2014/53/ EU of the European Parliament and of the Council. The full text of the Declaration of Conformity is available at: www.orava.eu... - Page 12 Parts description and controls Top side 1 Central adapter for SP records at 45 rpm 2 Carrying arm 3 Pickup arm lift control Lifting the pickup arm 4 Auto stop control Default in Auto mode 5 Speed switch (33, 45, 78 rpm) 6 Ceramic carrying case with diamond needle 7 Turntable records 8 ON/OFF/VOLUME...
- Page 13 Rear panel 10 AUX IN connector 3.5 mm mini-connector for connecting an external audio device to input a signal from a connected audio device 11 RCA connectors RCA OUT RCA connectors (L / R) for connection to an external amplifier to output an audio signal from this unit to a connected audio device 12 DC 12V Power connector for connecting the AC adapter to connect power from an electrical...
-
Page 14: Preparation For Use
Connections Connecting the AC adapter Connect the supplied 12 V AC adapter to an easily accessible electrical socket with the specified voltage of 230 V/50 Hz. Then connect the cable connector from the AC adapter to the DC 12 V connector on this unit. -
Page 15: Protect Your Furniture
PROTECT YOUR FURNITURE This model is equipped with non-slip rubber “feet” that prevent the device from moving while manipulating the controls. These “legs” are made of non-slip rubber material with a special composition so as not to leave any marks or stains on the furniture. However, some types of petroleum-based furniture polishes, wood preservatives or cleaning sprays can soften the “feet”, which they can then leave on the furniture. - Page 16 Sticker with description Grooves Edges Cleaning • Before playing, clean the disc with a soft, dry antistatic cleaning cloth. Clean the record along the grooves. • Do not use solvents such as petrol, thinner, or commercially available cleaners. Replacing the pickup with a needle The needle has an average life of about 250 hours in normal use.
- Page 17 1 Turn ON/OF/VOLUME to the right to turn on the unit. 2 Be sure to remove the needle cover from the transfer case and release the transfer arm lock clip by gently sliding it to the right to secure the transfer arm to the transfer arm armrest.
- Page 18 4 On a Bluetooth device (phone, etc.), search for available Bluetooth devices. For details, refer to the operating instructions of the device. When RR-41 appears on the display of your Bluetooth device, select it and wait until the pairing confirmation is shown on the display of your Bluetooth device.
-
Page 19: More Details
More details Wireless BLUETOOTH technology BLUETOOTH wireless technology is a short-range technology that enables wireless data communication between digital devices such as PC and digital camera. Wireless BLUETOOTH technology works in a range of about 10 m. The two devices are connected to each other, but some devices can be connected to more than one device at a time. -
Page 20: Maintenance
Notes • To use the BLUETOOTH function, the connected BLUETOOTH device must have the same profile as this system. • Even if the profiles are the same, the devices may work differently depending on their specifications. • Due to the characteristics of wireless BLUETOOTH technology, the sound reproduced by this system is slightly delayed compared to the sound from the BLUETOOTH playback device during a telephone call or listening to music. -
Page 21: Troubleshooting
The Bluetooth device will find several other Bluetooth devices during the search: Wait for the search to complete and select “RR-41” to pair. When using the phone, do not hold the mobile device too close to the loudspeaker to avoid echo... -
Page 22: Technical Specifications
Technical specifications Gramophone Motor: servo motor for direct current (DC) Drive system: belt Speed: 33 rpm, 45 rpm and 78 rpm Fluctuation and deviation: less than 0.35% (WTD) Signal-to-noise ratio: more than 50 dB Carrying case type: ceramic stereo carrying case with diamond needle Amplifier Channels: 2 audio channels...
Need help?
Do you have a question about the RR-41 and is the answer not in the manual?
Questions and answers