Subscribe to Our Youtube Channel
Related Manuals for Orava MT-210
Summary of Contents for Orava MT-210
- Page 1 MT-210 Instruction manual 0197 29.01.2021 rev.1.0 Infrared ear/forehead thermometer...
-
Page 2: General Safety Instructions And Warnings
1. GENERAL SAFETY INSTRUCTIONS AND WARNINGS This document contains important safety instructions and warnings for the safe and correct operation and use of the “medical device - body temperature measuring device”. Adherence to it helps the user to avoid risks, increase the reliability and durability of the product. - Page 3 1.2 Characteristics of the operating environment • Do not use the device in an industrial or outdoor environment. • Always keep the operating and storage environment of the device clean and dry. • Protect the device from dirt and dust. Do not expose the device to direct sunlight, excessive heat, strong mechanical stress or vibration.
- Page 4 1.4 Personal safety • The device is intended for use by persons without electrical qualification (by laymen) according to the instructions specified by the manufacturer. • Only operations such as switching on and off, user manipulation, visual or auditory control and user cleaning are required to operate the device.
-
Page 5: Security Symbols
2. SPECIAL SAFETY INSTRUCTIONS AND WARNINGS • The device is intended exclusively for private, non-commercial use - measuring the body temperature of people. Verification of the measurement accuracy is possible by comparison with another verified measuring device. The verification interval is recommended every 2 years. -
Page 6: Device Information
• Please do not use the product for any purpose other than measuring the temperature of the human body, subjects. • The use of mobile phones in the immediate vicinity of the product is prohibited. • Please do not use devices that generate electromagnetic fields in the immediate vicinity of the product. -
Page 7: User Security
• Possibility to store up to 9 measured temperature values • Switch between degrees Fahrenheit (°F) and degrees Celsius (°C) (default setting: degrees Celsius °C) • Immediate measurement for 1 second • Comfortable and economical design without the use of earbuds and without additional operating costs •... - Page 8 • Avoid cross-contamination and affect measurement accuracy. 7 Protect the product from mechanical damage. • Damage to the product could lead to inaccurate measurement results. 8 If you accidentally immerse the product in water or if you splash water on it, make sure that the product is completely dried up.
- Page 9 Tips for measuring temperature Comparison of different measurement methods The measured values differ when using different measurement methods. The World Health Organization (WHO) provides reference values for normal human body temperature values, specific temperature differences can be found in the overview below.
-
Page 10: Description Of Parts
Description of parts 1 Measuring probe 2 Display 3 Measurement start button 4 MEM button 5 Power switch 1 6 Battery compartment cover 7 Head cover for measuring the temperature from the front... - Page 11 Description of symbols on the display 1 Device memory symbol 2 Audio on/off icon 3 Battery status icon 4 Measurement result 5 Temperature units (°F or °C) 6 Object temperature measurement icon 7 Front measurement icon 8 Ear temperature measurement icon...
-
Page 12: Power Supply
Power supply The device is powered by two 1.5 V AAA batteries, which are not supplied. Batteries must be inserted before using the device. 1 Squeeze the battery cover and open the battery compartment. 2 Insert 2 AAA batteries (2x 1.5 V) into the battery compartment. - Page 13 • Do not disassemble, throw into fire or short-circuit batteries. Dispose of used batteries in an environmentally friendly manner in accordance with national or local regulations. • Protect batteries from excessive heat. Remove the batteries from the device after discharging them or before using the product for a long time.
- Page 14 Backlight function When the measurement results show a temperature below 34 °C, the text LO will appear on the display with a red backlight. When the measurement results capture normal body temperature (34 - 37.1 °C), this temperature is shown on the green backlit display.
- Page 15 Methods of measuring temperature 0~5mm The center of the forehead Children under 1 year of age - pull Children older than 1 year and the ear backwards. adults - pull the ear back and up. Ear temperature Ear temperature Head temperature Ear temperature measurement Advice Before measuring...
- Page 16 Head temperature measurement Advise Install the probe temperature cover to measure the forehead temperature. After fitting the measuring probe cover, switch on the device with the pressed switch 1. When the forehead temperature measurement mode is switched on, the last measurement result is displayed.
-
Page 17: Cleaning And Maintenance
Cleaning and maintenance In order for the device to work properly, it is recommended to clean the measuring probe after each measurement. 1 Clean the measuring probe after each measurement with a cotton swab moistened with alcohol. This will prevent contamination. -
Page 18: Troubleshooting
Troubleshooting See this table for the following displays. Information The reason The solution on the display 1 If the measuring probe is When the temperature of the target object not correctly positioned is higher than the in the ear canal during measurement range the measuring process in the ear temperature... - Page 19 When the ambient . If the error message „Err“ temperature is displayed, leave the changes rapidly by device out of operation for about 5 °C in the approx. 30 minutes before object temperature the next measurement. measurement mode, the error message „Err“...
-
Page 20: Technical Specifications
Technical specifications Product Name: Infrared ear/forehead thermometer Model: MT-210 Dimensions: 31 × 175 × 72 mm Weight: approx. 77 g (without batteries) Measuring range body temperature: 34.0 - 43.0 ° C Measuring range surface temperature (objects): 0 - 93.2 ° C Resolution: 0.1 °... - Page 21 Manufacturer‘s recommendations and declarations - electromagnetic radiation The MT-210 is intended for use in the electromagnetic environment specified below. The customer or the user must ensure that the MT-210 infrared thermometer model is used in such an environment. Emissions Compliance...
- Page 22 Manufacturer ‚s recommendations and declarations - electromagnetic immunity The MT-210 model of the infrared thermometer is intended for use in the electromagnetic environment specified below. The customer or the user must ensure that the MT-210 infrared thermometer model is used in such an environment.
- Page 23 The MT-210 is intended for use in the electromagnetic environment specified below. The customer or the user must ensure that the MT-210 infrared thermometer model is used in such an environment. Resistance level Compliance Electromagnetic test level level environment - reco-...
- Page 24 RF transmitters, consider performing electromagnetic measurements at the site. If the field strength measured in the vicinity of the MT-210 infrared thermometer model exceeds the above permissible limits, carefully check the operation of the infrared thermometer model.
- Page 25 Model MT-210 is designed for use in electromagnetic environments, where any interfering RF radiation is regulated. The customer or the user of the MT-210 infrared thermometer model can reduce electromagnetic interference by maintaining a minimum distance between portable and mobile RF devices...
-
Page 26: Battery Disposal
Authorized representative for the EU: Lotus NL B.V., Koningin Julianaplein 10, 1e Verd, 2595AA, The Hague, Netherlands. Tel.: +31645171879 Importer: ORAVA retail 1, a.s. ORAVA distribution CZ, s.r.o. Seberíniho 2 Ostravská 494 821 03 Bratislava 739 25 Sviadnov Slovenská republika...
Need help?
Do you have a question about the MT-210 and is the answer not in the manual?
Questions and answers