Getting Started; Stand - Photoframe Assembly; Connecting The Power Adapter - Philips SPF 3408/G7 User Manual

3. Getting Started

3.1 Stand – PhotoFrame Assembly
Step 1: Hold the PhotoFrame in an upright position.
Step 2: Pull out the stand and then slide it out as follows to ensure that the frame
stands upright for the best viewing angle.
Note:
For safety reasons and best stability, Philips recommends adjusting the stand with
the angle defined by the two click positions. Using other positions may cause the
PhotoFrame to fall and it is the responsibility of the user.

3.2 Connecting the Power Adapter

Connect the supplied power adapter from PhotoFrame to a power outlet.
ON
OFF
9
Philips Eros 8DN UM_0914_book.indb 9 2009/9/17 上午 09:13:34