Iget HOMEGUARD HGWIP811 Quick Start Manual page 4

Get the App
For the best experience, download the Homeguardcare app for your smartphone by scanning the QR code below or searching for
"Homeguardcare" in the app store.
6
All manuals and user guides at all-guides.com
Step 1
Network Connection
Connect the AC adapter to
your camera and plug it in.
LED status
LED indicator shows operational status with colors.Refer to table below for detailed meaning of the LED indicator.
LED Indicator Network status indicator Blue color Working status indicator Red color
Blinking quickly WiFi configuration succeeded Begin to upgrading
Connecting to WiFi by One Key The device works normally
Blinking slowly
Configuration on App but no Internet connection
Keep blue (Network status) 1. WPS configuration: to search available WPS AP
Internet connected
Keep red (Working status) 2. WiFi mode: to connect the available WiFi signal
1. RJ45 Connection: wired connected
The indicator is off The device is not launched
2. WiFi connection is failed
Connect the camera to your router
using an Ethernet cable.
Make sure you are within range of the
same Wi-Fi network you'll use for your
camera.
7