Philips ID555 Quick Start Manual page 2

What's in the box
Handset Base station
1 Li-ion Power supply
rechargeable battery
User manual Guarantee
*You may find in the box the line adaptor delivered separately from the line
cable. In this case, you have to connect the line adaptor to the line cord
first before plugging the line cord to the line socket.
In multihandset packs, you will find one or more additional handsets, chargers with
power supply units and additional rechargeable batteries.
WARNING
Always use the cables and batteries that came with your phone.
1 Connect
Connect the base station
1. Place the base station in a central location near the telephone line socket
and electricity socket.
Battery door
2. Connect the line cord and the power cable to their corresponding
connectors at the back of the base station.
3. Connect the other end of the line cord and power cable to their
respective sockets.
Install
2 2
Insert rechargeable batteries and charge
Line cord*
A
Insert batteries
Quick Start Guide
Configure your phone (if necessary)
After installing the batteries and charging your phone for a few minutes, your
phone displays a Welcome message in various languages:
m
1. Press
:
2. Scroll
m
3. Press
Your phone is now ready for use.
B Charge handset for 24 hours
SELECT .
to your country and the associated language.
SELECT
to confirm your selection.
3 Enjoy
Make a call
r
Dial the number (maximum 24 digits) and press
OR
r v
Press or key to take the line and dial the number (maximum 24
digits).
Answer a call
r v
When the phone rings, press or key.
End a call
e
To end a conversation, press key.
Adjust the earpiece or speaker's volume
:
VOLUME 1
During a call, press to select from
VOLUME 3
.
Set the ring melody
M :
1. Press in idle mode, scroll to PERSONAL SET
m :
SELECT HANDSET TONES
, scroll to
m :
SELECT RING TONES
, scroll to and press
:
2. Scroll to your desired melody.
m
SELECT
3. Press to set the ring melody.
A validation tone is emitted and the screen returns to previous menu.
Store a contact in the phonebook
M :
PHONEBOOK
1. Press key in idle mode, scroll to
m m
SELECT SELECT NEW ENTRY.
, press to enter
ENTER NAME
2. is displayed on the screen.
3. Enter the name of the contact (maximum 14 characters) and press
m
OK
.
4. Enter the phone number (maximum 24 digits) and press
A validation tone is emitted.
Access the phonebook
d :
1. Press in idle mode and scroll to browse the phonebook.
m
SELECT
2. To view the details, press .
v
or key.
VOLUME 2
, or
and press
and press
m
SELECT
.
and press
m
OK
.