Install The Handset; Set The Date And Time; Charge The Handset - Philips CD280 User Manual

Install the handset

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Use only the supplied batteries.
•
Risk of decreased battery life! Never mix
different brands or types of batteries.
Warning
•
Check the battery polarity when inserting in
the battery compartment. Incorrect polarity
may damage the product.
The batteries are pre-installed in the handset.
Pull the battery tape off from the battery door
before charging.

Set the date and time

Tip
•
To set the date and time later, press
skip this setting.
1
Select [Menu] > [Phone setup] > [Date
& time], then press [OK] to confirm.
2
Press the numeric buttons to enter the
date, then press [OK] to confirm.
» The time setting menu is displayed on
the handset.
3
Press the numeric buttons to enter the time.
Note
•
If the time is in 12-hour format, press
select [AM] or [PM].
4
Press [OK] to confirm.

Charge the handset

Place the handset on the charging cradle to
charge the handset. When the handset is placed
correctly on the charging cradle, your hear a
docking sound.
» The handset starts charging.
Note
•
Charge the batteries for 8 hours before first
use.
•
If the handset becomes warm when the
batteries are being charged, it is normal.
Your phone is now ready to use.
[Back] to
/ to
EN
9