Page 1
HS01 Smart Security Camera User Manual The information in this manual is subject to change without notice. Rexing All Rights Reserved www.rexingusa.com...
Page 2
(877) 740-8004 Our support team will respond to you as soon as possible. Always a surprise in Rexing. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference.
Product Overview USB Port Wide-angle Lens Reset Button Motion Sensor Light Sensor Indicator Light Microphone Speaker Blue Indicator Light Indicator Light Flashing Red Blue Light Wi-Fi Connecting Live View Flasing Blue Motion Detection...
Safety Guide 安全ガイド The information in this manual is subject to change without notice. Rexing All Rights Reserved www.rexingusa.com www.rexingusa.com Rexing HS01 Security Camera Solar Panel Mount Screw Packs Rechargeable 6000mAh Battery Solar Panel Safety Guide Pack (included in the unit)
Get Started Step 1. Download the Rexing Home App You may download the app by searching "Rexing Home" in the App Store or Google Play Open the App and Sign up/ Log in to your account To add your camera, select the + icon.
Step 3. Insert the battery Insert the battery into the bottom of your camera until it clicks into place. Please remember to peel the adhesive protector off the battery before inserting it into the unit. Step 4. Close the battery cover Push and slide the battery cover back until it locks into place.
Page 7
Use your camera to scan the QR Code shown on the App, then select Confirm once the Wi-Fi setup has finished. �" Distance Step 7. Give it a try! After setup, tap the Live View in the app to see live video from your Rexing HS01 Security Camera.
Page 8
Install Your Security Camera Step 1. Attach the camera mount Step 2. Secure tightly with the stand screw...
Step 3. Choose a location Place the Rexing HS01 Security Camera anywhere, inside or outside your home. It can be mounted on a wall, ceiling, or placed on a tabletop. Put it in an area where you wish to view it.
Install the Solar Panel Please complete the camera setup in the App prior to installing the solar panel (included). Install the Solar Panel if you wish to have a completely self-sustaining device. Step 1. Choose a installation location Pick an unshaded spot for best sun exposure. The solar panel should be installed where it will receive several hours of direct sun light daily.
Page 11
Step 4. Install the mounting arm Use a screwdriver to secure the mounting arm to the wall and make sure that it is tightened securely. Step 5. Attach the solar panel Attach the solar panel onto the mounting arm, ensure that it is installed correctly. Note: You may adjust the angle of the solar panel for better sun coverage.
Page 12
Step 6. Charging and powering the camera Power the Rexing Smart Security Camera by plugging the Micro USB of the solar panel into the USB port of the camera.
Troubleshooting and FAQ If you experience some issues during the app setup, try these steps: Check your Wi-Fi password. The most common issue during setup is incorrect Wi-Fi passwords. Passwords are case sensitive. Please double-check your password. Reboot the router/modem. If you have entered the correct password, but still experiencing issues, try unplugging the power to your router/modem.
Page 14
Share via QR Code: Open the App on a new user's smartphone. From the home page, tap +. Tap share with QR Code, then scan the QR code that was generated by the device owner. You will see Share successful, then tap Confirm. How many users can view the video at the same time? Up to 3 users may view the video feed, but only 1 user can use the direct intercom.
Warranty & Support Warranty The Rexing HS01 Security Camera comes with a full 12-month warranty. If you register your product on our official site (https://www.rexingusa.com/support/registration), you can extend the warranty to 18 months. Support If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at...
Page 16
FCC ID: 2AW5W-HS01 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the HS01 and is the answer not in the manual?
Questions and answers