Page 1
HS01 Smart Security Camera User Manual The information in this manual is subject to change without notice. Rexing All Rights Reserved www.rexingusa.com...
Page 2
(877) 740-8004 Our support team will respond you as soon as possible. Always a surprise in Rexing. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference.
Page 3
Features USB Port Wide-angle Lens Reset Button Motion Sensor Light Sensor Indicator Light Microphone Speaker Blue Indicator Light Indicator Light Flashing Red Blue Light Wi-Fi Connecting Live View Flasing Blue Motion Detection...
Safety Guide 安全ガイド The information in this manual is subject to change without notice. Rexing All Rights Reserved www.rexingusa.com www.rexingusa.com Rexing HS01 Security Camera Camera Mount Screw Packs Rechargeable 6000mAh Battery Solar Panel User Manual Pack (included in the unit)
Set up Your Camera Before You Start You may download the app by searching "Rexing Home" in the Apple or Google Play store. Open the App and log in to your account To add your camera, select the + icon.
2. Insert the battery Insert the fully charged battery into the bottom of your camera until it clicks into place. Please remember to peal the adhesive protector off the battery before inserting it into the unit. 3. Attach the battery cover. Push and slide the battery cover back until it locks into place.
Page 7
Use your camera to scan the QR Code shown on the App, then select Confirm once the Wi-Fi setup has finished. �" Distance 5. Give it a try! After setup, tap the Live View in the app to see live video from your Rexing HS01 Security Camera.
Page 8
Install Your Security Camera 1. Attach the mount to the camera 2. Secure tightly with the stand screw...
3. Choose a location Place the Rexing HS01 Security Camera anywhere, inside or outside your home. It can be mounted on a wall, ceiling, or placed on a tabletop. Put it in an area where you wish to view. Mounted on a ceiling...
Page 10
How to Install the Solar Panel Please complete the camera setup in the App prior to installing the solar panel (included). Install the Solar Panel if you wish to have a completely self sustaining device which doesn't require you to replace batteries. Choose a installation location Pick an unshaded spot for best sun exposure.
Page 11
Drill the holes Optional: You may opt to use a drill bit to drill the holes where you have previously marked. • For mounting surfaces that are brick, concrete, or stucco, please use the plastic anchors. You may need to use a hammer to install the anchors. •...
Page 12
Lastly, plug the solar panel charging cable into the camera. Let’s start charging! Charging and Powering the camera Power the Rexing Smart Security Camera by plugging the Micro USB of the solar panel into the USB port of the camera.
Troubleshooting and FAQ If you experience some issues during the app setup, try these steps: Check your Wi-Fi password. The most common issue during setup is incorrect Wi-Fi passwords. Passwords are case sensitive. Please double-check your password. Reboot the router/modem. If you have entered the correct password, but still experiencing issues, try unplugging the power to your router/modem.
Page 14
Share via QR Code: Open the App on a new user's smartphone. From the home page, tap +. Tap QR Code Sharing, then scan the QR code the device owner generated before. You will see Share successful, then tap Confirm. How many users can view the video at the same time? Up to 3 users may view the video feed, but only 1 user can use the direct intercom.
Warranty & Support Warranty The Rexing HS01 Security Camera comes with a full 12-month warranty. If you register your product on our official site (https://www.rexingusa.com/support/registration), you can extend the warranty to 18 months. Support If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at...
Page 16
FCC ID: 2AW5W-HS01 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the HS01 and is the answer not in the manual?
Questions and answers