Page 1
U S E R M A N U A L CONVECTOR HEATER 2000 W • AdjustAble thermostAt • 3 heAt settings • Power IndicAtor light • Free stAnding or wAll mountAble • overheAt Protection • sAFety thermAl cut out...
INDEX • ASSEMBLY OF THE HEATER • WALL MOUNTING • SAFETY INSTRUCTIONS • OPERATION OF THE HEATER • POWER SETTINGS • CLEANING AND MAINTENANCE • STORAGE • CONFORMITY WITH DIRECTIVES • ENVIRONMENT FRIENDLY DISPOSAL • 2 YEAR LIMITED WARRANTY • REPAIRS PROCEDURE...
USER INSTRUCTIONS Please read this instruction manual carefully before using the heater for the first time and always keep these instructions. ASSEMBLY OF THE HEATER (FOR USE ON THE FLOOR AS A PORTABLE APPLIANCE) Before using the heater, the feet (supplied separately in the box), must be fitted to the unit.
WALL MOUNTING (FOR USE OF THE HEATER AS A FIXED APPLIANCE) The heater is supplied with four (of each) fixing brackets, screws and plastic wall plugs to enable it to be mounted onto a wall if required. If it is decided to mount the heater on the wall, the feet should not be fitted. The wall positioning must be chosen carefully.
Page 5
It is suggested that the heater is hung on the upper brackets and the hole positions for the lower brackets are then marked on the wall prior to drilling the holes for attachment purposes. See the figures below.
SAFETY INSTRUCTIONS (TO BE READ BEFORE OPERATING THE HEATER) 1. If the heater is used as a portable appliance, ensure the feet are correctly attached before use. 2. Ensure the power supply to the socket into which the heater is plugged is in accordance with the rating label on the heater.
OPERATION OF THE HEATER Note: It is normal for the heater to emit a smell and fumes when it is turned on for the first time or after not being used for a prolonged period. The fumes will disappear after a short while of the heater being in use. 1.
CLEANING AND MAINTENANCE • Always unplug the heater from the wall socket and allow it to cool down completely before cleaning. • Only clean the outside of the heater by wiping it with a damp cloth and dry it with a dry cloth. Do not use any detergents or abrasives. •...
CONFORMITY WITH DIRECTIVES This product is CE marked to denote conformity with Directives 2006/95/EC (Low Voltage) and the EMC directive (2004/108/EC), as amended. ENVIRONMENT FRIENDLY DISPOSAL You can help protect the environment! Please remember to respect the local regulations: hand in the non-working electrical equipment to an appropriate waste disposal centre.
2 YEAR LIMITED WARRANTY The Manufacturer hereby provides a warranty to the original purchaser of this product (‘the consumer’) that this product will be free of manufacturing defects in materials and workmanship which under normal, personal, family or household use (commercial use expressly excluded) manifest themselves within the 2 year from the date of purchase.
REPAIRS PROCEDURE Should you experience any faults on your Aim product, please adhere to the following procedure to have the fault rectified speedily and professionally. You can return the product to the store. Call the Pick n Pay CUSTOMER CARE number on 0860 30 30 30 (only in South Africa) to report the fault and make arrangements for the next steps.
Need help?
Do you have a question about the ACH20 and is the answer not in the manual?
Questions and answers