Page 1
U S E R M A N U A L TOWER HEATER WITH OSCILLATING FUNCTION 2000 W • 2 Heat settings (1000 W / 2000 W) • CeramiC PtC Heating element • Cool / Warm / Hot Heat seleCtion • osCillation FunCtion •...
USER INSTRUCTIONS Please read this instruction manual carefully before using for the first time and always keep these instructions. IMPORTANT SAFEGUARDS When using the PCT Tower Heater, basic safety precautions should always be followed including the following: 1. Make sure the power supply used corresponds to the rating label. 2.
Page 4
IMPORTANT SAFEGUARDS - CONTINUED 16. Do not use the appliance for other than its intended use as described in this instruction book. 17. Do not place the heater immediately below a socket outlet. 18. This appliance is intended for household use only. 19.
USER INSTRUCTIONS 1. Remove the unit from the box and take off any protective wrapping. 2. Place the heater on a smooth level surface and least 30 cm away from any obstacles. 3. Plug your heater into the power supply. Make sure your power supply corresponds to the power indicated on the rating label.
CLEANING AND MAINTENANCE 1. Always disconnect the appliance from the main supply before cleaning. 2. Clean the outside of the heater by wiping with damp cloth and with a dry cloth. 3. Do not use solvents or chemical agents to clean the heater.
CONFORMITY WITH DIRECTIVES This product is CE marked to denote conformity with Directives 2006/95/EC (Low Voltage) and the EMC directive (2004/108/EC), as amended. ENVIRONMENT FRIENDLY DISPOSAL You can help protect the environment! Please remember to respect the local regulations: hand in the non-working electrical equipment to an appropriate waste disposal centre.
2 YEAR LIMITED WARRANTY The Manufacturer hereby provides a warranty to the original purchaser of this product (‘the consumer’) that this product will be free of manufacturing defects in materials and workmanship which under normal, personal, family or household use (commercial use expressly excluded) manifest themselves within the 2 year from the date of purchase.
REPAIRS PROCEDURE Should you experience any faults on your Aim product, please adhere to the following procedure to have the fault rectified speedily and professionally. You can return the product to the store. Call the Pick n Pay CUSTOMER CARE number on 0860 30 30 30 (only in South Africa) to report the fault and make arrangements for the next steps.
Need help?
Do you have a question about the APTC6T and is the answer not in the manual?
Questions and answers