Faqs (Frequently Asked Questions); General Faqs - Philips 201EL1 User Manual

FAQs (Frequently Asked Questions)

• Safety and Troubleshooting

• General FAQs

• Compatibility with Other Peripherals
• LCD Panel Technology
• Ergonomics, Ecology and Safety
Standards
• Troubleshooting
• Regulatory Information
file:///E|/manual SPEC/813/spec/cd/Q70G20C1813 1A 201EL1/CD/lcd/manual/ENGLISH/201E1/safety/saf_faq.htm（第 1／4 页）2009-11-23 8:23:02
FAQs (Frequently Asked Questions)
General FAQs
Q1:
When I install my monitor what should I do if the screen shows 'Cannot display this
video mode'?
A:
Recommended resolution for Philips 20": 1600x900 @60Hz.
Unplug all cables, then connect your PC to the monitor that you used previously.
1.
In the Windows Start Menu, select Settings/Control Panel. In the Control Panel Window, select
2.
the Display icon. Inside the Display Control Panel, select the 'Settings' tab. Under the setting
tab, in box labeled 'desktop area', move the slidebar to 1600x900 pixels (20").
Open 'Advanced Properties' and set the Refresh Rate to 60Hz, then click OK.
3.
Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1600x900@60Hz
4.
(20").
Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor.
5.
Turn on your monitor and then turn on your PC.
6.
Q2:
What does the recommended refresh rate for LCD monitor?
Recommended refresh rate in LCD monitors is 60Hz, In case of any disturbance on screen, you can
A:
set it up to 75Hz to see if that removes the disturbance.
Q3: What are the .inf and .icm files on the CD-ROM? How do I install the drivers (.inf and .
icm)?
These are the driver files for your monitor. Follow the instructions in your user manual to install the
A:
drivers. Your computer may ask you for monitor drivers (.inf and .icm files) or a driver disk when you first
install your monitor. Follow the instructions to insert the ( companion CD-ROM) included in this package.
Monitor drivers (.inf and .icm files) will be installed automatically.
Q4: How do I adjust the resolution?