DC power cord for normal operation. • Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center.) •...
1.Important Temperature: 0-40°C 32-95°F Humidity: 20-80% RH • IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause "burn in", also known as "after-imaging"...
Recycling Information for Customers Your display is manufactured with high quality materials and components which can be recycled and reused. To learn more about our recycling program please visit www.philips.com/about/sustainability/ recycling.
2. Setting up the monitor 2.1 Installation Package contents Monitor Base Stand Power cord Install base stand 1. Place the monitor face down a smooth surface taking care to avoid scratching or damaging the screen. 2. Hold the monitor base stand with both hands and firmly insert the base stand into the base column.
Connecting to your PC Kensington anti-thief lock AC power input DVI-D input VGA input Audio input USB upstream and downstream Earphone jack Connect to PC Connect the power cord to the back of the monitor firmly. Turn off your computer and unplug its power cable.
Description of the On Screen Display What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips Monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
Page 9
Resolution notification This monitor is designed for optimal performance at its native resolution, 1600 x 900 at 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1600 x 900 at 60 Hz for best results.
2.3 Remove Base Stand and Base Remove the Base Stand Before you start disassembling the monitor base, please follow the instructions below to avoid damage or injury. 1. Extend the monitor base to its maximum height. 70mm Place the monitor face down on a smooth surface, taking care to avoid scratching or damaging the screen.
Remove the Base Condition: • For VESA standard mounting applications. 1. Remove the 8 screw covers. 2. Remove the 4 screws and then remove thebase from the monitor. Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. 100mm 100mm...
How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. Based on a scenario you select, SmartImage dynamically enhances the contrast,...
• Movie: Ramped up luminance, deepened color saturation, dynamic contrast and razor sharpness displays every details in darker areas of your videos without color washout in brighter areas maintaining a dynamic natural values for the ultimate video display. • Game: Turn on over drive circuit for best response time, reduce jaggy edges for fast moving objects on screen, enhance contrast ratio for bright and dark scheme, this...
3.3 Philips SmartControl Premium The new SmartControl Premium software by Phillips allows you to control your monitor via an easy to use on-screen graphic interface. Complicated adjustments are a thing of the past as this user friendly software guides you...
Page 15
Color menu • Color Menu allow you to adjust RGB, Black Level, White Point, Color Calibra- tion, and SmartImage (Please refer to SmartImage section). • You can follow the instruction and do the adjustment. • Refer to below table for sub-menu item base on your input.
Page 16
1. "Show Me" starts color calibration tutorial. 2. Start - starts the 6-step color calibration sequence. 3. Quick View loads the before/after images. 4. To return to Color home pane, click the Cancel button. 5. Enable color calibration - by default is on. If unchecked, does not allow for color calibration to happen, dimes out start and quick view buttons.
Page 17
SmartImage Allows user to change setting for better display setting based on content. When Entertainment is set, SmartContrast and SmartResponse are enabled. Theft Deterrence Pane will only be active when selecting Theft Deterrence Mode from the drop-down Plug Ins menu. To enable Theft Deterrence, clicking Enable Theft Deterrence Mode button brings up the following screen:...
Page 18
After creating PIN, the Theft Deterrence pane will indicate Theft Deterrence Enabled and provide PIN Options button: • Theft Deterrence Enabled is displayed. • Disable Theft Deterrence Mode opens pane screen on next page. • PIN Options button only available after user creates PIN, button opens secure PIN web site.
Page 19
Options>Input - Will only be active when selecting Input from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. All other SmartControl Premium tabs are not available. • Display the Source instruction pane and current input source setting.
Page 20
Help>User Manual - Will only be active when selecting User Manual from the drop-down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. Help>Version - Will only be active when selecting Version from the drop- down Help menu.
The task tray has five entries: • Help - Access to User Manual file: Open User Manual file using the default browser window. • Technical Support - displays the tech sup- port page. • Check for Update - takes the user to PDI Landing and checks the user’s version against the most current available.
Page 22
Drag and Drop Windows Once the partitions are configured and Align to partition is selected a window can be dragged into the region and it will automatically align. When the window and mouse cursor are within the region, the region will become highlighted. Note If the outline of the region is not visible when dragging the window, “Show windows contents...
Page 23
Note If more than one display is attached, the user can select the targeted display to change the partition. The highlighted icon represents the current active partition. 3. Identify Partition – Displays the outline grid on the desktop for the current partition.
Page 24
SmartDesktop Partition Definitions Name Description Full Desktop Applies all settings to the entire desktop. Vertical Assesses the screen resolution and divides the display into two evenly sized vertical regions. For 90/270 maintain vertical configuration. Horizontal Assesses the screen resolution and divides the display into two evenly sized horizontal regions.
Page 25
Name Description Horizontal Split Top Assesses the screen resolution and divides the display into two evenly sized horizontal regions, the top region is single, the bottom region is spilt into two evenly sized regions. For 90 Partition 1 on right side Vertical Partition 2&3 on left side Vertical.
4. Technical Specifi cations 4. Technical Specifications Picture/Display Monitor panel type Backlight Panel size Aspect ratio Pixel Pitch Brightness SmartContrast Contrast ratio (typ.) Response time (typical) Optimum Resolution Viewing angle Picture Enhancement Display colors Vertical refresh rate Horizontal Frequency sRGB Connectivity Signal input Input Signal...
Page 27
4. Technical Specifi cations Heat Dissipation* Normal Operation Sleep Power LED indicator Power Supply Dimension Product with stand (WxHxD) Product without stand (WxHxD) Box dimension (WxHxD) Weight Product with stand Product without stand Product with packaging 201BL2 Power On mode On mode (ECO mode) Energy Consumption (EnergyStar 5.0 test method)
Page 28
Color Finish Note 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net for registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
5. Power Management 5. Power Managementt 5.1 Automatic PowerSaving If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle. Congratulations! This display is designed for both you and the...
Page 32
6. Regulatory Information EPEAT (www.epeat.net) “The EPEAT (Electronic Product Environmental Assessment Tool) program evaluates computer desktops, laptops, and monitors based on 51 environmental criteria developed through an extensive stakeholder consensus process supported by US EPA. EPEAT system helps purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental...
Page 33
6. Regulatory Information Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 34
6. Regulatory Information • Réorienter ou déplacer l'antenne de réception. • Augmenter la distance entre l'équipement et le récepteur. • Brancher l'équipement sur un autre circuit que celui utilisé par le récepteur. • Demander l'aide du marchand ou d'un technicien chevronné en radio/télévision. Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de conformité...
Page 35
6. Regulatory Information BSMI Notice (Taiwan Only) Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften. Auf der Rückwand des Gerätes befindet sich ein Aufkleber, der auf die Unbedenklichkeit der Inbetriebnahme hinweist, da die Vorschriften über die Bauart von Störstrahlern nach Anlage III ¤...
No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains the different types of pixel defects and defines acceptable defect levels for each type.
Page 38
In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
7.2 Customer Care & Warranty For warranty coverage information and additional support requirement valid for your region, please visit www.philips.com/support website for details. You may also contact your local Philips Customer Care Center number listed below. Contact Information for WESTERN EUROPE region:...
Page 40
7. Customer care and warranty Contact Information for CENTRAL AND EASTERN EUROPE region: Country Call center BELARUS BULGARIA CROATIA ESTONIA LATVIA LITHUANIA ROMANIA SERBIA & MONTENEGRO SLOVENIA UKRAINE Russia Slovakia Turkey Czech Rep. Hungary Contact Information for LATIN AMERICA region: Country Call center Brazil...
Page 41
PT. Gadingsari elektronika Prima PCS One Korea Ltd. After Market Solutions (CE) Sdn Bhd Philips Consumer Service Philips Electronics Singapore Pte Ltd (Philips Consumer Care Center) FETEC.CO Axis Computer System Co., Ltd. Sylvara Technologies Pty Ltd AL SHAHD COMPUTER L.L.C...
• Do not perform any troubleshooting steps. • Disconnect the monitor from mains power source immediately for safety. • Contact with Philips customer service representative immediately. Imaging Problems Image is not centered. • Adjust the image position using the “Auto”...
Page 43
The "power on" light is too strong and is disturbing. • You can adjust “power on” light using the power LED Setup in OSD main Controls. For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative.
SmartControl Premium and re-install it once more. I forgot my PIN for Theft Deterrence Function. How can I do? Ans.: Philips Service center has a right to ask for legitimate identification and authorization, in order to establish ownership of the monitor.
Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1600 x 900 @60Hz. • Shut down your computer, disconnect your old monitor and reconnect your Philips Monitor. • Turn on your monitor and then turn on your PC.
Page 46
6504K. Can I connect my Monitor to any PC, workstation or Mac? Ans.: Yes. All Philips Monitors are fully compatible with standard PCs, Macs and workstations. You may need a cable adapter to connect the monitor to your Mac system.