Advertisement
P R O D U C T O V E R V I E W
D I M E N S I O N S
I M P O R TA N T:
1. Please read the entire instructions before installing the extractor.
2. Always switch power off prior to installation.
3. Stainless steel is very easily damaged during installation if scratched or knocked by tools.
Protect the extractor with the cardboard box or plastic bag during installation.
4. All electric work must be done in accordance with the local and national electrical codes
as applicable.
5. For safety, this product must be earthed.
6. A power outlet should be within 1500mm of the power cord exit from the extractor.
7. The power socket must be accessible and enable the end user to isolate the extractor from the
power for the purpose of internal cleaning or maintenance.
8. 150mm round ducting adapters are supplied. All other ducting accessories are not supplied.
All ducting must comply with local requirements and building codes.
See Ducting options next page.
C O N T E N T S O F PA C K A G I N G :
1 x Hood body
1 x face plate
1 x Pack of installation screws
1 x Ducting spigot
1 x Face plate installation kit
10
Instruction manual BUCH75
9mm
T Y P I C A L E Q U I P M E N T R E Q U I R E D :
1. Electric drill
2. Screwdriver
3. Tape measure
4. Spirit level
5. Duct tape (if ducting)
6. Jig saw (if ducting)
7. Ladder (if ducting)
Please keep this instruction manual for future reference
550mm
241mm
750mm
Advertisement
