Sony MCC-3000MT Manual page 18

Inputs/outputs (camera control
unit)
Input connectors
DC IN
DIN 3-pin, DC 24 V
EXT SYNC IN
BNC
Output connectors
VIDEO OUT
BNC, 1.0 Vp-p, 75 Ω, unbalanced
HD SDI OUT A, B
BNC, conforming to SMPTE292M
standards
Input/output connectors
CAMERA A, B
36-pin
REMOTE
D-sub 9-pin, conforming to RS-232C
Other connector
Equipotential ground terminal
1)
USB (Universal Serial Bus)
Specification Revision 2.0 (up to Full
Speed)
1)
Used for servicing.
Optional accessories
Camera cable
CCMC-T05/T10/T15/T20
Design and specifications are subject to change
without notice.
18
Specifications
Medical Specifications
Protection against harmful ingress of water:
Ordinary
Degree of safety in the presence of a flammable
anesthetic mixture with air or with oxygen or
nitrous oxide:
Not suitable for use in the presence of a
flammable anesthetic mixture with air or with
oxygen or nitrous oxide
Mode of operation:
Continuous
Note
Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE
FOR DAMAGES OF ANY KIND
INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT
ON ACCOUNT OF THE LOSS OF PRESENT
OR PROSPECTIVE PROFITS DUE TO
FAILURE OF THIS UNIT, EITHER DURING
THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR
FOR ANY OTHER REASON
WHATSOEVER.