Philips 170X4 User Manual page 11

Product Information
• Input Frequency
AUDIO
• Input signal level
• Input signal connector
• Loudspeaker
OPTICAL CHARACTERISTICS
• Contrast ratio
• Brightness
• Peak contrast angle
• White Chromaticity
• Viewing Angle (C/R >5)
• Response time
sRGB
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g. digital
cameras, monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible
device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you
can rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a
predefined setting as well as the color gamut. Therefore it is important to select the sRGB setting in the
monitor's OSD.
To do so, open the OSD by pressing the OK button on the front of your monitor. Use the down button
to go to Adjust Color and press OK again. Then move the down button to go to sRGB and press OK
again.
file:///D|/My%20documents/dfu/B2C/ENGLISH/170X4/product/product.htm (6 of 10) [3/1/2004 6:01:59 PM]
SXGA Hsync 64-81 kHz, Vsync 60-76 Hz (N.I.)
XGA Hsync 48- 61 kHz, Vsync 60 - 76 Hz (N.I.)
SVGA Hsync 35- 50 kHz, Vsync 56 - 75 Hz (N.I.)
VGA Hsync 31- 38 kHz, Vsync 60 - 76 Hz (N.I.)
0.5 V RMS
3.5mm mini jack
4W Stereo Audio (2W/channel RMS x2, 200Hz-12kHz, 16 ohm,
THD=10%)
400 (typ.)
2
260 cd/m (typ.)
6 o'clock
x: 0.283 y: 0.297 (at 9300° K)
x: 0.313 y: 0.329 (at 6500° K)
x: 0.313 y: 0.329 (at sRGB)
Upper >80° (typ.)
Lower >80° (typ.)
Left >80° (typ.)
Right >80° (typ.)
<=25ms (typ.)