Philips 109F Electronic User's Manual page 12

109F Product Information
• Input signal levels
• Sync input signal
• Sync polarities
WHITE COLOR TEMPERATURE
Chromaticity CIE coordinates:
• at 9300 degrees K
• at 6500 degrees K
sRGB
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g.
digital cameras, monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB
compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are
calibrated and you can rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a
predefined setting as well as the color gamut. Therefore it is important to select the sRGB
setting in the monitor's OSD.
To do so, open the OSD by pressing the OK button on the front of your monitor. Use the down
button to go to Color temperature and press OK again. Then move the down button to go to
sRGB and press OK again.
Exit this OSD.
After this, please don't change the brightness or contrast setting of your monitor. If you change
either of these, the monitor will exit the sRGB mode and go to a color temperature setting of
6500K.
* These information are subject to change without notice.
file:///D|/EDFU/crt_19_5/edoc/english/109F/PRODUCT/PRODUCT.HTM (7 of 10)2005-04-21 ¤W¤È 09:36:20
0.7 Vpp
Separate sync
Composite sync
Positive and negative
x = 0.283 / y = 0.297
x = 0.313 / y = 0.329
RETURN TO TOP OF THE PAGE