Input Signal Selection - Philips 109B Electronic User's Manual

109B The OSD Controls
4) Press the button to confirm your selection and return to MAIN CONTROLS window. CLOSE
MAIN CONTROLS will be highlighted...
After returning to MAIN CONTROLS . . .
Smart
. . . to continue to INPUT SIGNAL SELECTION, press the
INPUT SIGNAL SELECTION is highlighted. Next, follow steps 3 - 5 under
Help

INPUT SIGNAL SELECTION.

. . . to exit completely, press the
INPUT SIGNAL SELECTION
INPUT SIGNAL SELECTION determines what you see on the screen. The default setting is INPUT
A, but if the video input signal is different that the output signal, you may want to change it to INPUT
B.?
1) Press the button on the monitor. The MAIN CONTROLS window appears.
2) Press the button until INPUT SIGNAL SELECTION is highlighted.
file:///E|/manual/english/109B/osd/osd_cont.htm (4 of 27)2004-10-19 下午 01:47:12
RETURN TO TOP OF THE PAGE
(Not available in all models)
button
button until