Panasonic UJ160ABPSN-B Specifications page 11

Preliminary
Model Number : UJ160ABPSN-B
11. Power Management
11-1. Status Changes
5
STANDBY
Tray : open
Disc : NC
1: At first host executes reset sequence after power is supplied. If a disc is attached and a tray is
closed, the drive status becomes ACTIVE Mode. And next If host doesn't execute command
for certain time(default 30 sec) a disc stops, and changes STANDBY Mode .In the case of
receiving ATAPI command(Standby Immediate),the drive status changes STANDBY Mode soon.
2: In the case of STANDBY Mode at the status that a disc is attached and a tray is closed,
if the drive receives command from host, the drive status changes ACTIVE Mode soon.
3: In the case of ACTIVE Mode, a disc is stopped and a tray is opened by ATAPI eject command
or pushing eject button at front bezel. And next the drive status change STANDBY Mode again.
KOK-B3-001-T6 Issue 5
Power ON
RESET
Open
Tray Open?
Close
Disk
Inserted?
Yes
ACTIVE
3
1
4
STANDBY
Tray : close
Disc : inserted
4
* Electrical status in a drive is same at STANBY1,2,3
Panasonic System Networks Co.,Ltd
No
6
2
STANDBY
Tray : close
Disc : no inserted
Optical Devices Business Unit
PAGE
11
7
SLEEP
Tray : NC
Disc : NC
6
24
/