►Menu: Program
► Installation
► Channel
► System
► Media / Internet
►Installation
► Terrestrial Scan DVB-T/T2
► Cable Scan DVB-C
Menu functions and settings:
Scan DVB-T2:
Region:
Tuner Power 5V:
LCN:
Red key (Auto search):
12
Press the OK button here to enter the DVB-T setup menu (see below).
Select the area here.
Here you can set additional voltage for DVB-T reception.
Here you can choose if you want the channel names to be included in
the search.
In the "Auto search" section you can choose between "All"
and "Free to Air". With OK, the automatic channel search starts.
DVB-T/T2
This menu item will come in
handy when setting up DVB-T
reception. Make sure the anten-
na is in a good receiving posi-
tion.
At the bottom you can see the
intensity and quality level of the
antenna signal. This indication
may vary depending on the an-
tenna installation location or the
values you select in the menu
fields.
Version of October 10th, 2021