1. Manuals
  2. Brands
  3. Radicom Research Manuals
  4. Modem
  5. RW8300E-a-PR
  6. Designer's manual

Radicom Research RW8300E-a-PR Designer's Manual

Hide thumbs Also See for RW8300E-a-PR:
Table of Contents

Advertisement

Quick Links

Download this manual
Radicom Research. Inc.
Designer's Guide for the
RW8300E-a-PR
A set of paired devices:
RW8300E-NL + RW8300E
RW8300E
RW8300E-NL
Firmware version:
RW8300E-NL: RW8300E-a-NL.RRI.041_3.4.6.6
RW8300E: RW8300-D.RRI.110_3.4.6.6
Compliant
Date: Jan 30. 2020
Doc#RRD2Z50-20200130001

Advertisement

Table of Contents
loading

Related Manuals for Radicom Research RW8300E-a-PR

Summary of Contents for Radicom Research RW8300E-a-PR

  • Page 1 Radicom Research. Inc. Designer’s Guide for the RW8300E-a-PR A set of paired devices: RW8300E-NL + RW8300E RW8300E RW8300E-NL Firmware version: RW8300E-NL: RW8300E-a-NL.RRI.041_3.4.6.6 RW8300E: RW8300-D.RRI.110_3.4.6.6 Compliant Date: Jan 30. 2020 Doc#RRD2Z50-20200130001...

  • Page 2: Table Of Contents

    Research assumes no responsibility for its use. or any infringement of patents or other rights of third parties that may result from its use. Radicom Research reserves the right to change circuitry at any time without notice. This document is subject to change without notice.

  • Page 3: Introduction Of Rw8300E-A-Pr (Usb-Device) Universal Adapter Products

    USB host to a Wi-Fi router with Ethernet This combination allows any device to connect into an Ethernet based router. No password or user intervention needed. NOTE: ※RW8300E-a-PR firmware for USB Host and USB Device are not compatible. RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)

  • Page 4: Features

    Support IEEE802.3x full duplex flow control • Support IEEE802.3az Energy efficiency • Support IEEE 802.11i (WPA. WPA2. WEP). Security ~ Open. shared key. and pair-wise key authentication services • Support TLS mode • Firmware upgradable RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)

  • Page 5: Approvals

    47 CFR FCC Part 15 Subpart C 15.247 & ANSI C63.10 2013 IC Certification • ICES-003.Issue 6 .January 2016. • RSS-247 Issue 2 Feb 2017 Japan Certification • SCS-F135 Japan Radio Certificate RoHS 3 compliant RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)

  • Page 6: Rw8300E-A-Pr (Usb) Universal Adapter Application Summary

    WARNING: Please ensure the AP router is not 192.168.137.xxx domain for sub-net otherwise the device will get 192.168.136.xxx IP address. RW8300E-a-PR is a factory paired solution which includes a RW8300E and a RW8300E-NL for non-configuration WiFi applications. Once USB. power adapter and Ethernet cables are inserted.

  • Page 7: Model & Ordering Information

    RW8300E-a-PR-1 US/CAN. PN: 9500-0879-21 RW8300E-a-PR-1 Include RW8300E. RW8300E-NL. RJ45 cable and Power adapter (USA.UL.PSE). PN:4000-0001-01 RW8300E-a-PR-2 RW8300E-a-PR-2a RW8300E-a-PR-2 West EU. PN: 9500-0879-22 Include RW8300E. RW8300E-NL. RJ45 cable and power adapter (CE). RW8300E-a-PR-3 PN:4000-0001-02 RW8300E-a-PR-4 RW8300E-a-PR-2a North EU. PN: 9500-0879-32 Include RW8300E. RW8300E-NL. RJ45 cable and power adapter (CE).
  • Page 8 Plug types :Type I is used for Australia. New Zealand. China. Argentina +others PN: 4000-0001-04 Power Adapter for CE Power adapter- UK. Ireland (CE) connects to RW8300E. 100-240VAC/5VDC. 1A. USB mini-B Type Plug types :Type G is used for UK. Ireland. Malta. Malaysia. Singapore +others RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 9 PN:6000-0029-02 3ft RJ-45 cable Cable.RJ45.8P8C.Cat5e.3ft.Light Blue Label Remover Tool PN:2820-0000-00 Tool. RW8300E-a-PR Label Remover. Yellow Package box PN:4100-0268-00 Box. RW8300E-a-PR package box Package label PN:2400-0662-01 Label. RW8300E-a-PR-1 package label PN:2400-0662-02 Label. RW8300E-a-PR-2 package label PN: 2400-0662-05 Label. RW8300E-a-PR-2a package label PN:2400-0662-03 Label.

  • Page 10: Rw8300E-A-Pr (Usb) General Information

    Storage temperature: 0~+70 range of °C and % R.H. Humidity: <10% RH Operating temperature: 0~+50 Operating temperature and humidity Humidity: <95% RH IP classification protection against harmful Ingress Protection Rating 21 ingress of water and particulate matter. RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 11 Physical Description RW8300E-NL: 2.7” x 1.4” x 1.0” (67.4 x 35.8 x 26.4mm) Size & Weight 36.1g RW8300E: 2.7” x 1.4” x 1.0” (67.4 x 35.8 x 26.4mm) Size & Weight 30.6g RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)

  • Page 12: Rw8300E-A-Pr Standalone Product Mechanical Diagram

    RW8300E-a-PR Standalone Product Mechanical Diagram Size: RW8300E Size: 67.4 x 35.8 x 26.4mm [2.65” x 1.41” x 1.04”] RW8300E-NL Size: 67.4 x 35.8 x 26.4mm [2.65” x 1.41” x 1.04”] Unit: mm[inch] Top View Side View RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)

  • Page 13: Rj45 Ethernet Cable Description

    8-pin modular connector. A male RJ45 plug is mounted on each end of the twisted pair cable. A female RJ45 jack or receptacle is integrated into the Ethernet hub or NIC. Ethernet Connector (J1) RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)

  • Page 14: Rw8300E-A-Pr (Usb-Device) Led Operation

    1. Glowing: RW8300E-a-PR is power on and ready. 2. Blinking in 2 seconds: RW8300E-a-PR could connect to internet. 3. Blinking in 1/2 seconds: RW8300E-a-PR will reboot after release the reset button. 4. Blinking in 1/8 seconds: RW8300E-a-PR will reset to factory default setting after release the reset button then reboot.

  • Page 15: Wps/Reset Button On Rw8300E-A-Pr (Usb-Device)

    Reboot/Reset to default 1. RESET multi-functional button (MFB) MFB button supports reboot and reset functions. Reboot RW8300E-a-PR: Press MFB for 2-5 seconds Reset RW8300E-a-PR factory default setting: Long-press MFB over 5 seconds. 2. WPS button: Reserved RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)

  • Page 16: Rw8300E-A-Pr Quick Start Method

    RW8300E-a-PR Quick Start Method RW8300E-a-PR is a factory pre-paired solution which includes one RW8300E and one RW8300E-NL to become a non-configuration WiFi solution. Please prepare RW8300E-a-PR. internet accessible AP router and your equipment for setup environment. You may need to install the driver for RW8300E-NL if your machine does not have pre-install driver.

  • Page 17: Connection Process Of Rw8300E-A-Pr

    This session details a method to set up RW8300E connection. ※Please make sure RW8300E is at default settings. you can refer chapter “WPS/RESET Button on RW8300E-a-PR (USB-Device)” on page 15. 1. Ensure the router operates via the RJ45 Ethernet: Connect RJ45 Ethernet cable from your computer to the Internet router to make your computer access to Internet via the RJ45 connection.

  • Page 18: Various Connection Processes Of Rw8300E-A-Pr

    ※ Ensure RW8300E has powered on and connected router by RJ45 cable. ※ Ensure RW8300E-NL is at default setting. For RW8300E(-NL) button position. check “WPS/RESET Button on RW8300E-a-PR (USB-Device)” on page 15. RW8300E-NL setup environment Windows XP Device Plug RW8300E-NL into USB port on your device.
  • Page 19 2.3 Manually executed auto play to setup Wait for one minute. You’ll see green LED is flashing on both RW8300E-NL. Now. you have Internet on the device again. If it doesn’t work. please check “trouble shooting” on page RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 20 4.2 Wait for one minute. You’ll see green LED is flashing on both RW8300E-NL. Now. you have Internet on the device again. If it doesn’t work. please check “trouble page shooting” on ※Linux kernel version requires 2.6 above. RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)

  • Page 21: Trouble Shooting

    1.1.3 Execute “ipconfig /release” command to release all IP address setting 1.1.4 Execute “ipconfig /renew” command to renew the IP address. Linux Device 1.2.1 Press “Windows Key” to go to search box. Windows key 1.2.2 Key in “gnome-terminal” to open terminal application. Search gnome-terminal RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 22 Check network interface name of RW8300E-NL 3.1.2 Key in “netsh interface ip set dns “Local Area Connection 2” static 8.8.8.8” to setup DNS1. 3.1.3 Key in “netsh interface ip add dns “Local Area Connection 2” 8.8.4.4” to setup DNS2. RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 23 Response message Check DSN setting 3.1.5 If you see the message “The requested operation requires elevation <Run as administrator>”. please re-run terminal as administrator purview. Then repeat step. 3.1.1 to 3.1.4. Purview error Run as administrator RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 24 3.2.1 Set DNS through GUI. 3.2.1.1 Press “Windows Key” to enter search box. Windows key 3.2.1.2 Key in “Settings” to open system setup window. Search “Settings” 3.2.1.3 Click “Network” to get network setup window. Click Network RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 25 3.2.1.4 Click “USB Ethernet” on the left side. and then click gear symbol to open configuration window. Network setup window 3.2.1.5 Click “IPv4” on the left side. Network configuration RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 26 3.2.1.6 Key “8.8.8.8” in textbox of DNS. Then click plus symbol . Key in “8.8.4.4” to second textbox. and click “Apply”. Before set DNS After set DNS RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 27 3.2.1.7 Open terminal application. and key in “systemctl restart NetworkManager” to restart network interface. Restart network interface 3.2.1.8 Key in “cat /etc/resolv.conf” to check DNS setting. Check DNS setting RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)

  • Page 28: Reset Rw8300E-A-Pr (Usb-Device) To The Default

    Reset RW8300E-a-PR (USB-Device) to the Default This chapter will show you how to reset and reboot RW8300E-a-PR with multi-functional button (MFB). ※For RW8300E-a-PR button position. please refer to chapter “WPS/RESET Button on RW8300E-a-PR (USB-Device)” on page 15. Reset RW8300E-NL to factory default setting Connect your device and RW8300E-NL with USB cable to power on RW8300E-NL.

  • Page 29: Upgrade Rw8300E-A-Pr Firmware

    1.1.3 Set up IPv4 static IP address under Ethernet interface of the device. Set IP address to “192.168.1.100”. ※To know more details about “Static IP setting”. please refer to page 33. 1.1.4 Open a browser (ex: chrome. IE. FireFox…) on the device. and go to http://192.168.1.254. RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 30 RW8300E web page RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 31 ※To know more details about “obtain an IP address automatically”. Please refer to page 36. 1.2.3 Open a browser (ex: chrome. IE. FireFox…) under your device. And go to http://192.168.137.254. Then click “Advanced Setting”. RW8300E-NL web page of Setup Wizard RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 32 2.1.2 Key “cmd” in search box and press “Ctrl” + “Shift” + “enter” to run terminal as administrator purview. Open terminal as administrator purview Terminal of administrator purview 2.1.3 Key in “ipconfig” to check the name of LAN interface. Check name of LAN interface RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 33 2.1.5 Key in “ipconfig” to check IP address. Check IP address 2.2 Linux Device ※This example operates on Fedora 20 system. 2.2.1 Press “Windows Key” to go to search box. Windows key 2.2.2 Key in “gnome-terminal” to open terminal application. Search gnome-terminal RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 34 Check name of LAN interface 2.2.4 Key in “ifconfig enp0s25 192.168.1.100” to set IP address. (Command format: ifconfig Interface name IP address) Command sample 2.2.5 Key in “ifconfig” to check IP address. Check IP address RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 35 3.1.1 Press “Windows Key” to enter search box. Windows key 3.1.2 Key “cmd” in search box and press “Ctrl” + “Shift” + “enter” to run terminal as administrator purview. Open terminal as administrator purview Terminal of administrator purview RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 36 Connection 6" source=dhcp” to set static IP address and subnet. (Command format: netsh interface ipv4 set address name="Interface name" source=dhcp) Command sample 3.1.5 Key in “ipconfig /all” to check IP address and DHCP Enabled. Check IP address and DHCP Enabled RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 37 RW8300E / RW8300E-NL web page 4.1.3 Click “Browse…” to open firmware file (.bin file) and click “Upload” to upgrade firmware. Upgrade firmware 4.1.4 Wait 120 seconds to upgrade firmware and reboot RW8300E / RW8300E-NL. Count down page RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
  • Page 38 4.1.5 After upgrade RW8300E / RW8300E-NL firmware. reset to default setting by reset button. Please check “WPS/RESET Button on RW8300E-a-PR (USB-Device)” on page 15. 4.2 Check firmware version 4.2.1 Open a browser and go to RW8300E / RW8300E-NL web page.
  • Page 39 Create md5sum of new firmware 4.3.5 Key in “cat ReleaseNote.txt” and find out the correspondent release version. Then please compare md5sum in release note with md5sum of bin file. Both of them should be the same. Release Note RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)

  • Page 40: Get Rw8300E-Nl Web Page On Pair Connection

    2. By curl: Install curl tool and execute under command mode. 3. By curl library: Install curl develop tool and write down a proprietary program. 4. By TCP/IP socket: Use basic socket API to write down a proprietary program. RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)

  • Page 41: Emc Guidance And Manufacturer's Declaration

    EMC Guidance and Manufacturer’s Declaration Test Voltage kV ESD in air discharge 15KV ESD in contact discharge RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)

  • Page 42: Rw8300E-A-Pr Regulatory Domain Frequencies

    FCC. IC. CE and TELEC Module Model Identification The RW8300E-a-PR module family is FCC Part 15 and IC (Industry Canada) certified. The RW8300E-a-PR is also CE. TELEC marked. The modules are labeled with the appropriate RW8300E-a-PR module model number and FCC Part 15 ID. IC registration number and CE mark.
  • Page 43 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)

  • Page 44: Fcc. Ic. And Ce. Telec Label Location And Module Model Identification

    Europe – The Radio Equipment Directive (RED) Compliance Statement: Hereby. Radicom Research Inc. declares that this equipment complies with the essential requirements and other relevant provisions of Radio Equipment Directive (RED) 2014/53/EU.
  • Page 45 CE Declaration of Conformity For the following equipment: Radicom Research Inc. WiFi USB Modem Module Model(s): RW8300E-NL. RW8300E is herewith confirmed to comply with the requirements set out in the Council (European parliament) Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility of Radio and Telecom device (1999/5/CE).

  • Page 46: Limited Warranty

    Limited Warranty Warranty Coverage and Duration Radicom Research. Inc. (“RRI”) warrants to the original purchaser its RRI-manufactured products (“Product”) against defects in material and workmanship under normal use and service for a period of one year from the date of delivery. During the applicable warranty period.
  • Page 47 DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT. FOR ANY LOSS OF USE. LOSS OF TIME. INCONVENIENCE. COMMERCIAL LOSS. LOST PROFITS OR SAVING OR OTHER INCIDENTAL. SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE OR FAILURE OF SUCH PRODUCT. RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)

  • Page 48: Contacting Radicom

    Contacting Radicom Research If more information or technical support is needed. please contact us: 671 E Brokaw Road San Jose. CA. 95112 USA Telephone: (408) 383 9006 Fax: (408) 383 9007 http://www.radi.com/ RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)

This manual is also suitable for:

Rw8300e-nlRw8300e

Table of Contents