Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Radicom Research Manuals
  4. Adapter
  5. RW8300E-a-PR
  6. Quick start manual

Radicom Research RW8300E-a-PR Quick Start Manual

Hide thumbs Also See for RW8300E-a-PR:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
Radicom Research, Inc.
RW8300E-a-PR
A set of paired devices:
RW8300E-a-NL + RW8300E-a

Advertisement

loading

Related Manuals for Radicom Research RW8300E-a-PR

Summary of Contents for Radicom Research RW8300E-a-PR

  • Page 1 Radicom Research, Inc. RW8300E-a-PR A set of paired devices: RW8300E-a-NL + RW8300E-a...
  • Page 2 Summary RW8300E-a-PR is a solution for non-configuration WiFi applications. It combines a pre-paired set of Radicom devices combining a RW8300E-a-NL (USB-Device) and a RW8300E-a (USB-Device). Simply plug a RJ-45 and USB cable, with a USB Power adapter and you can have Internet access from any USB port. See Fig. 1...
  • Page 3 Once confirmation of the connection to the Internet via the PC and the Router, remove the PC and connect the RJ-45 Ethernet cable between the RW8300E-a and the router. Plug the USB power adapter into USB connector on the RW8300E-a. Wait about 1 minute for booting complete. RW8300E-a-PR Quick Guide Draft v.004(02-24-17)
  • Page 4 1.2 Once system detect USB device, it will install USB driver automatically. If not, follow the PC pop-up screen to run setup.exe. Note: If PC does not automatically install the USB driver, please manually execute the CD Driver Figure 5 Manually executed auto play to setup RW8300E-a-PR Quick Guide Draft v.004(02-24-17)
  • Page 5 2.3 Wait for one minute. You should be able to see Green LED flashing on both RW8300s. Now, you can use your notebook computer for Internet again. If not please refer the trouble shooting in page 8. RW8300E-a-PR Quick Guide Draft v.004(02-24-17)
  • Page 6 4.2 Wait for one minute. You should be able to see Green LED flashing on both RW8300s. Now, you can use your Linux based device for Internet again. If not please refer the trouble shooting in page 8. ※ Linux kernel version 2.6 above RW8300E-a-PR Quick Guide Draft v.004(02-24-17)
  • Page 7 2 Reset to default: Insert a pin into the reset hole (near the LAN port), and long press RESET button over 5 seconds. RW8300E-a(-NL) (USB-Device) will turn to factory default setting, and LED will flash within 0.3 seconds. Once system reboots and LED flashes per 2 seconds, reset successfully. RW8300E-a-PR Quick Guide Draft v.004(02-24-17)

  • Page 8: Troubleshooting

    Figure 11 Windows key Then key in “gnome-terminal” to open terminal application. Figure 12 Search gnome-terminal 2.2 Key in “sudo dhclient –r” to release IP address setting. 2.3 Key in “sudo dhclient” to renew the IP address. RW8300E-a-PR Quick Guide Draft v.004(02-24-17)
  • Page 9 Contact Radicom Research If more information or technical support is needed, please contact us: 2148 Bering Drive San Jose, CA. 95131 Telephone: (408) 383 9006 Fax: (408) 383 9007 http://www.radi.com/ RW8300E-a-PR Quick Guide Draft v.004(02-24-17)