OPERATOR'S MANUAL
MANUEL D'UTILISATION
MANUAL DEL OPERADOR
18 VOLT STRING TRIMMER/EDGER
18 V TAILLE-BORDURES À LIGNE/COUPE-
BORDURES
18 V RECORTADORA DE HILO/
RECORTADORA DE BORDES
P20018
TABLE OF CONTENTS
Symbols .......................................... 4-5
Features ..............................................5
Assembly ........................................ 6-7
Operation ........................................ 8-9
Parts Ordering/Service ........ Back Page
WARNING:
To reduce the
risk of injury, the user must read and
understand the operator's manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
TABLE DES MATIÈRES
Symboles ............................................5
Entretien ............................................10
Commande de pièces/
réparation .......................... Páge arrière
AVERTISSEMENT :
réduire les risques de blessures,
l'utilisateur doit lire et veiller à bien
comprendre le manuel d'utilisation
avant d'employer ce produit.
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
ÍNDICE DE CONTENIDO
Símbolos .............................................5
Armado ........................................... 6-7
Pedidos de piezas/
servicio ........................... Pág. posterior
Pour
ADVERTENCIA:
el riesgo de lesiones, el usuario debe
leer y comprender el manual del
operador antes de usar este producto.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
Para reducir
Need help?
Do you have a question about the P20018 and is the answer not in the manual?
Questions and answers
My trimmer is a P20180. No English instructions were enclosed. I do not find this model's instruction book. please help
You can find the English instructions for the Ryobi P20180 trimmer in the operator’s manual titled "P20018_108793001_700_eng." This manual contains 34 pages and includes detailed use and care information in English.
This answer is automatically generated
The "slot" in the spool is referenced. There are 4 slots in the spool. Does the line stay in one of these slots while it is running or is it supposed to be pulled out and go directly thru the eye on installation? The line on this machine either seems to get jammed up and won't advance or advances way to fast. Is this normal?