Optimizing Image Brightness - Casio Exilim EX-Z300 User Manual

NOTE
• A movie that is shorter than five seconds cannot be edited.
• Editing of movies recorded with a different type of camera is not supported.
• You will not be able to edit a movie if the amount of remaining memory capacity is
less than the size of the movie file you want to edit. If there is not enough memory
available, delete files you no longer need to free up more.
• Splitting of a movie into two movies and splicing of two different movies into a
single movie are not supported.
• You also can start a movie editing operation while the movie you want to edit is
playing back. Press [SET] to pause playback, and then press [2] to display the
menu of editing options. Perform editing using the same procedures as described
above.
Optimizing Image Brightness (Lighting)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas
in existing images.
+2 Performs a higher level of brightness correction than the "+1" setting.
+1 Performs brightness correction.
Cancel Does not perform brightness correction.
NOTE
• Correcting the lighting when shooting produces better results (page 78).
• Altering the lighting of an image causes the original image and the new (altered)
version to be stored as separate files.
• When you display an altered image on the camera's monitor screen, the date and
time indicates when the image was originally recorded, not when the image was
altered.
91
Other Playback Functions (PLAY)