Snapshot Tutorial; Using The Control Panel - Casio Exilim EX-Z300 User Manual

Snapshot Tutorial

Using the Control Panel

The Control Panel can be used to configure camera settings.
1.
In the REC mode, press [SET].
This will select one of the Control Panel icons and display its settings.
[8] [2] [4] [6]
[SET]
2.
Use [8] and [2] to select the setting you want to change.
Image size/Quality* (pages 25, 74)
1
Flash (page 28)
2
Auto Shutter (page 30)
3
Auto Shutter trigger sensitivity
4
(page 32)
ISO sensitivity (page 41)
5
Continuous shutter (page 39)
6
* Image quality cannot be changed using the Control Panel.
3.
Use [4] and [6] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5.
After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
• You can configure the camera to turn off display of the Control Panel when you
press [SET] (page 126).
• You also can configure settings other than those listed above (page 61).
• The Control Panel cannot be displayed while a Prerecord Movie, For YouTube, or
Voice Recording Operation is in progress.
Available settings
Control Panel
Face recognition/Make-up
7
(pages 34, 46)
EV shift (page 42)
8
Date/Time (page 43)
9
24
1
2
3
4
5
6
7
8
9
Snapshot Tutorial