Table of Contents
Advertisement
Measuring
Item
instrument
Adjustment of
Signal
generator
H. CENTER
Remote
control unit
C
Adjustment
of H.SIZE
Adjustment
of EW-PIN
Test point
Adjustment part
3.H-CENT.
D
4.H-SIZE
ADJ. ITEM
6.EW-PIN
Straight
13. Receive a circle pattern signal.
14. Select 3.H-CENT and set the initial setting value.
15. Adjust H-CENT to make C=D .
16. Press the MENU/OK key and memorize the set value.
17. Receive a cross-hatch signal.
18. Select 4.H-SIZE and set the initial setting value.
19. Adjust H-SIZE and make sure that the horizontal screen size
of the picture size is in the bellow table.
20. Press the MENU/OK key and memorize the set value.
21. Input a NTSC VIDEO signal (60Hz) from the EXT terminal, and
make sure that the horizontal screen size is in the below table.
22. Press the MENU/OK key and memorize the set value.
ASPECT
MODE
REGULAR
92%
H-SIZE
23. Select 6.EW-PIN and set the initial setting value
24. Adjust EW-PIN and make the 2nd.vertical lines at the left and
right edges of the screen straight. Also make sure that the 3rd
vertical lines are straight.
25. Press the MENU/OK key and memorize the set value.
No. 51828
HV-L29PRO
Description
ZOOM
ZOOM
16 : 9
(FIXED)
(FIXED)
29
Advertisement
Table of Contents
