First, charge the battery prior to use.
Note that the battery of a newly purchased camera is not charged. Perform the steps
under "To charge the battery" to bring the battery to a full charge.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-60) for
power. Never try to use any other type of battery.
To charge the battery
1.
Positioning the positive + and
negative - terminals of the battery
with those of the charger unit, load
the battery into the charger unit.
2.
Plug the charger unit into a
household power outlet.
About 90 minutes are required to reach
full charge. The [CHARGE] lamp will go
out when charging is complete. Unplug
the power cord from the power outlet
and then remove the battery from the
charger.
Lamp Status
Lit Red
Flashing Red
Off
Description
Charging
Charger unit or battery problem (page 128)
Charging complete or standing by, due to abnormally
high or low ambient temperature (page 128)
15
[CHARGE] lamp
Quick Start Basics