Pin Description; J103 : Pin Assignment Of Power Input (Dc Jack Inside Diameter:2.1Ψ Outside Diameter:5.5Ψ Side Entry Type); J702 : Pin Assignment Of Uart (Pitch 1.25Mm 4Pin, Top Entry Type); J503 : Pin Assignment Of Analog Rgb Input ( D-Sub 15Pin) - FDT LP150X501x-FNR Manual

LP150X501x-FNR

8. Pin Description

8.1 J103 : Pin Assignment of Power Input (DC-Jack Inside Diameter:2.1
Pin No. Symbol
1 DC-In
2 GND
8.2

J702 : Pin Assignment of UART (Pitch 1.25mm 4Pin, Top Entry Type)

※ FDT Connector Part No.: MS24014 (STM) [Same as 53398-0471 (MOLEX)] ;
※ FDT Matching Connector Part No.: P24014 (STM) [Same as 51021-0400 (MOLEX)].
Pin No. Symbol
1 TX / RS232 TX (Option)
2 RX / RS232 RX (Option)
3 GND
4 +3.3Vdc
Note: All Functions can be controlled by UART , About UART command list please contact FDT sales.
8.3

J503 : Pin Assignment of Analog RGB Input ( D-Sub 15Pin)

Pin No. Symbol
1 RI+
2 GI+
3 BI+
4 GND
5 VGA-Det
6 AGND
7 AGND
8 AGND
9 VGA5V
10 GND
11 GND
12 VGA_SDA
13 HS_IN
14 VS_IN
15 VGA_SCL
I/O Description
I +12Vdc Input Voltage
- Power Ground
I/O Description
O UART / RS232 (Option) Transmission Data
I UART / RS232 (Option) Receive Data
- Ground
O +3.3Vdc Output Voltage
I/O Description
I Analog Red Signal
I Analog Green Signal
I Analog Blue Signal
- Ground
I VGA Detect
- Analog Ground
- Analog Ground
- Analog Ground
- VGA +5Vdc Input
- Ground
- Ground
- DDC2 Data
I TTL Horizontal sync.
I TTL Vertical sync.
- DDC2 Clock
ψ
Outside Diameter:5.5
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail-
This technical specification is subject to change without notice
2014 06 19 V0.1
ψ
Side Entry Type)
Remark
Remark
Remark
fdt@fdt.com.tw
P.10