Basic Operation - Daikin VRVIII RXYQ Series Operation Manual

Basic Operation

Cool/Heat/Auto/Fan Operation
How to follow the operation manual
Operation screen
display
Describes screens that
will be displayed on the
remote controller in
operation.
Preparation
● For mechanical protection purposes, apply power to the outdoor units at least six hours before starting the operation of the system.
Operation
1
●
Cool
Set to
74
Cool
F
Return Setting
Note
2
●
On/Off
nu
K
3
●
Cool
Set to
74
Cool
F
Return Setting
English
Operation
1
● Display the main menu screen.
Main Menu 1/2
Air Flow Direction
Ventilation
Schedule
● Press
Off Timer
Celsius / Fahrenheit
Maintenance Information
Setting
2
● Before setting the schedule , the
Schedule
Clock has not been set.
Would you like to set it now?
● If the clock has not been set, a screen
Yes No
Setting
● The date & time screen will appear.
Date & Time
Year 2008
● Set the current year, month, day, and
Month 01
Day 01
Tuesday
12:00
A
Setting
Press the Operation mode selector button several times until the desired
mode Cool, Heat, Fan, or Auto mode is selected.
* Unavailable operation modes are not displayed.
● Before changing the mode, confi rm that the display does not indicate master controlled status. Both
heat and cool mode may not be selected if the unit is master controlled. See page 15 if MASTER
CONTROLLED icon blinks.
Press On/Off button.
The Operation lamp (green) will illuminate and the system will start operating.
The setpoint will increase by
1°F (or 1°C) when button is pressed and decrease by 1°F (or 1°C) when
button is pressed.
* Setpoint is not available in fan or dry mode.
Operation procedure
Explains the sequence of
operation for the remote controller.
Operate the buttons according to
the procedure.
(See page 18.)
buttons to select
Schedule
the main menu screen.
Press Menu/OK button to display
the timer screen.
clock must be set.
like the one on the left will appear.
Yes
Press buttons to select and
press Menu/OK button.
time. (See clock settings on page 29.)
Operation button
display
Displays the location of
buttons to be operated.
11