Vermeer S450TX Quick Start Manual
  1. Manuals
  2. Brands
  3. Vermeer Manuals
  4. Mini Skid Steers
  5. S450TX
  6. Quick start manual

Vermeer S450TX Quick Start Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

S450TX Mini Skid Steer
Operator's
Manual
EN_o3_01 original instructions
Serial No. 910 -
Order No. 105400EX3
Cabled Assembly No. 163762735

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S450TX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vermeer S450TX

Summary of Contents for Vermeer S450TX

  • Page 1 S450TX Mini Skid Steer Operator’s Manual EN_o3_01 original instructions Serial No. 910 - Order No. 105400EX3 Cabled Assembly No. 163762735...
  • Page 2 This manual explains the proper operation of your machine. Study and understand these instructions thoroughly before operating or maintaining the machine. Failure to do so could result in personal injury or equipment damage. Consult your Vermeer dealer if you do not understand the instructions in this manual, or need additional information.
  • Page 3 Orientation: Right and left sides of the machine are determined by standing on the operator platform and facing forward. RADEMARKS VERMEER, VERMEER Logo, and EQUIPPED TO DO MORE are trademarks of Vermeer Manufacturing Company. KUBOTA is a trademark of Kubota, Ltd., Osaka, Japan.
  • Page 4 Vermeer Industrial Equipment not excluded below shall be repaired or replaced at Vermeer’s option without charge by any authorized independent Vermeer dealer. The warranty repair or replacement must be made by a Vermeer independent authorized dealer at the dealer’s location. Vermeer will pay for replacement parts and such authorized dealer’s labor in accordance with Vermeer’s labor reimbursement policy.
  • Page 5 (7) Transportation costs, if any, of transporting to the Vermeer dealer. Freight costs, if any, of transporting replacement parts to the Vermeer dealer. (8) The travel time of the Vermeer dealer’s service personnel to make a repair on the retail purchaser’s site or other location. (9) In no event shall Vermeer’s liability exceed the purchase price of the product, (10) Vermeer shall not be liable to any person under any circumstances for any incidental or consequential damages (including but not limited to, loss of profits, out of service time) occurring for any reason at any time.
  • Page 6 (12) Depreciation damage caused by normal wear, lack of reasonable and proper maintenance, failure to follow operating instructions, misuse, lack of proper protection during storage. (13) Accessory systems and electronics not of Vermeer’s manufacture are warranted only to the extent of such manufacturer’s respective Limited Warranty if any.
  • Page 7 NO DEALER WARRANTY. The selling dealer makes no warranty of its own and the dealer has no authority to make any representation or promise on behalf of Vermeer or to modify the terms or limitations of this warranty in any way.
  • Page 8 New Equipment Limited Warranty (the “Standard Limited Warranty”) for the Covered Components of the Specified Models of New Vermeer Industrial Equipment for the Extended Term, provided the Equipment is operated and maintained in accordance with the directions and instructions set forth in the Operator’s and Maintenance Manual(s). All conditions, exclusions, and limitations of the Standard Limited Warranty apply.
  • Page 9 This machine may be equipped with Vermeer GPS tracking equipment that collects and transmits data about the machine’s performance and location. This data is collected by Vermeer and held, used and shared consistently with the terms of the Vermeer Privacy Policy and any applicable provisions of the End User License Agreement (“EULA”) which may be found at: http:// www2.vermeer.com/vermeer/NA/en/N/privacy and http://telematics.vermeer.com.
  • Page 10 CE and have not been modified. We, Vermeer Manufacturing Company, declare under our sole responsibility that the product to which this declaration relates is in conformity with all relevant provisions of Directives 2006/42/EC, 2014/30/EU, 2000/14/EC, 2002/44/EC and EU 2016/1628.
  • Page 11 ___ Check that attachment does not tilt with key in OFF position and tilt lever pushed. ___ Check that loader arms do not lower with key in OFF position and lift lever pushed. S450TX Mini Skid Steer Receiving and Delivery Report i...

  • Page 12: Hydraulics

    Bucket attachment instructions are contained in this S450 Operator’s Manual. Contact your authorized Vermeer dealer, or visit www.vermeer.com for information on attachments authorized for use by Vermeer Corporation. ii Receiving and Delivery Report...

  • Page 13: Delivery

    Review and demonstrate with the customer the various aspects of machine operation: ___ overall explanation of how the machine works ___ machine safety ___ preparing the machine for operation ___ operating the machine S450TX Mini Skid Steer Receiving and Delivery Report iii...

  • Page 14: Dealer/Owner Information

    NFORMATION dealer owner address address city city state / province state / province zip / postal code zip / postal code country country phone number phone number email address email address iv Receiving and Delivery Report S450TX Mini Skid Steer...

  • Page 15: Identification Numbers - Record

    DENTIFICATION UMBERS ECORD Machine Model Number ________________ Machine Serial Number ________________ Kubota Engine Model Number ________________ Kubota Engine Serial Number ________________ S450TX Mini Skid Steer Receiving and Delivery Report v...

  • Page 16: Identification Decals

    These decals provide easy identification of the model and 17-digit identification number for the machine and attachments. The barcode contains the VIN number and can be scanned with any barcode reading device. Mini Skid Steer Identification Decal vi Receiving and Delivery Report S450TX Mini Skid Steer...

  • Page 17: Table Of Contents

    Loading/Unloading ......30-2 Vermeer Productivity Tools ....16-1 Driving onto Trailer .
  • Page 18 Look for Evidence of Underground Placement ..40-6 Operating with Other Vermeer-Authorized Attachments . . .50-11 Striking a Utility ....... . 40-7 Electricity .

  • Page 19: Safety Messages

    This symbol indicates that at least one part of the machine is not operating correctly. Shutting down the machine may not be necessary, but some maintenance may be required. S450TX Mini Skid Steer Safety Messages 10-1...
  • Page 20 WARNING: Wear required personal protective equipment. Wear close-fitting clothing and confine long hair. Additional personal protection requirements are explained separately. Refer to “Personal Protection,” page 40-2. WARNING: Keep spectators away. 10-2 Safety Messages S450TX Mini Skid Steer...
  • Page 21 Follow Shutdown Procedure after operating, before preforming any service or maintenance, and before transporting. Refer to Shutdown Procedure, page 23-1. S450TX Mini Skid Steer Safety Messages 10-3...
  • Page 22 Fluid injected under the skin must be removed immediately by a surgeon familiar with this type of injury. WARNING: Fuel and fumes can explode and burn. Shut off engine before refueling. No flame. No smoking. 10-4 Safety Messages S450TX Mini Skid Steer...
  • Page 23 WARNING: Moving parts can crush. Keep hands, feet, and clothing away from power- driven parts. Keep shields in place and properly secured. WARNING: Hot fluid under pressure can scald. Allow engine to cool before opening radiator cap. S450TX Mini Skid Steer Safety Messages 10-5...

  • Page 24: Crystalline Silica

    Medical surveillance • Employee training Be aware of and follow the guidelines of United States OSHA 29CRF1926.55 and 1926.1153, or other applicable regulatory guidelines. This includes having a jobsite plan for mitigating hazards. 10-6 Safety Messages S450TX Mini Skid Steer...
  • Page 25 Do not eat, drink, use tobacco products, • Store food, drink and personal belongings away from the work area. Make no modifications to this equipment unless specifically recommended by Vermeer Corporation. Be sure that all safety devices, including shields, are installed and functioning properly after servicing the machine.
  • Page 26 This page intentionally left blank.

  • Page 27: Fuel Tank Fill

    Section 12: Fuel Tank Fill WARNING: Fuel and fumes can explode and burn. Shut off engine before refueling. No flame. No smoking. Diesel Fuel Engines - Sulfur Content Requires Ultra Low Sulfur Diesel (ULSD) fuel, with sulfur content less than 15 ppm (15 mg/kg).

  • Page 28: Fuel Tank - Fill (Biodiesel Fuel)

    IODIESEL NOTICE: Refer to the Engine Operation Manual supplied with machine for instructions. Blended diesel fuels containing 6% thru 20% Biodiesel Fuel (B6 - B20) which comply with American • Society of Testing Materials ASTM D7467-09a standard, as revised, can be used without adversely affecting the performance and durability of the engine and fuel system components.

  • Page 29: Intended Use

    The S450 Mini Skid Steer can be equipped with a variety of attachments for light and medium duty work. Contact your Vermeer dealer, or visit www.vermeer.com, for information on the list of authorized attachments. The S450 must not be used with attachments which have not been evaluated by Vermeer Corporation and authorized for use.
  • Page 30 This page intentionally left blank.

  • Page 31: Vermeer Productivity Tools

    Serial numbers 2001 and up are equipped with Vermeer GPS tracking equipment. Vermeer uses GPS tracking equipment to collect data about the machine’s performance and location. When activated, the telematics control unit (TCU) transmits the data to a subscription-based website called Vermeer Telematics (formerly known as Vermeer Fleet/Fleet Edge).
  • Page 32 There are two levels of data access, as well as a third option which turns off the system. • Full Implementation - The subscription owner, Vermeer and authorized dealers can all access the data. A new machine, manufactured by Vermeer Corporation and equipped with telematics, automatically begins transmitting data to Vermeer and its authorized dealer.

  • Page 33: Controls

    Push forward ......increase engine speed Pull back......decrease engine speed S450TX Mini Skid Steer Controls 20-1...
  • Page 34 Turn ignition key to RUN position, then press Glow Plug Button and hold for 10–15 seconds. Continue to hold button while starting engine. (5) Hourmeter Indicates total number of hours engine has been in operation. 20-2 Controls S450TX Mini Skid Steer...

  • Page 35: Indicator Lights

    Light indicates low engine oil pressure and comes on when the ignition switch is initially turned ON. If the light does not shut off within 30 seconds after starting the engine or comes on during normal operation, shut off the engine and correct the issue. S450TX Mini Skid Steer Controls 20-3...

  • Page 36: Control Station

    Back left ....front turns left when moving in reverse Back right ... . front turns right when moving in reverse 20-4 Controls S450TX Mini Skid Steer...
  • Page 37 Center .........OFF Back..oil flows to attachment through male coupler S450TX Mini Skid Steer Controls 20-5...
  • Page 38 Right..... tilt attachment forward Left ......tilt attachment back 20-6 Controls S450TX Mini Skid Steer...
  • Page 39 Press left ....low auxiliary flow rate Press right....high auxiliary flow rate S450TX Mini Skid Steer Controls 20-7...

  • Page 40: Operator Presence System

    OFF before ground drive, lift/tilt, and attachment drive can be re-engaged. The Operator Presence system is intended for your safety and must be maintained in good functional condition. Contact your Vermeer dealer if it does not function correctly.

  • Page 41: Fuses And Relays

    Not used (6) 30A Spare (7) 20A Spare (8) Open Not used (9) Open Not used (10) Open Not used Relay Location Function Not used Operator Presence Latch Neutral Start Fuel Shutdown Not used S450TX Mini Skid Steer Controls 20-9...
  • Page 42 This page intentionally left blank.

  • Page 43: Starting Procedure

    Check to see that oil pressure warning light goes off. If not, shut off engine and correct the issue. Warm up engine at medium speed. Do not operate the engine under load until engine has warmed up. Step 8: Refer to the Engine Operation Manual for detailed information. S450TX Mini Skid Steer Starting Procedure 22-1...

  • Page 44: Cold Weather Starting

    Refer to Steps 5–6, page 22-1, for cold-weather starting. Whenever temperature drops below 5°F (-15°C), remove battery from machine and store indoors until next machine use. • An electric block heater is available from your Vermeer Dealer. • Refer to the Engine Operation Manual for recommendations and procedures for use of cold weather starting aids.

  • Page 45: Jump-Starting

    If equipped with battery caps, they must be in place and tight to reduce risk of battery explosion. NOTICE: Use only a 12-volt system for jump-starting. S450TX Mini Skid Steer Starting Procedure 22-3...

  • Page 46: Battery Burns - Avoid

    Internal: Drink large quantities of water or milk, follow with milk of magnesia, beaten egg, or vegetable oil. Call a physician immediately. Jump-Starting Procedure Step 1: Turn ignition switch to OFF. Open battery cable access door (1). Step 2: 22-4 Starting Procedure S450TX Mini Skid Steer...
  • Page 47 (2). Step 4: Start engine. Remove cables in reverse order and install covers over cable clamps. Step 5: Close and latch battery cable access door. BLACK Machine frame Boost battery S450TX Mini Skid Steer Starting Procedure 22-5...
  • Page 48 This page intentionally left blank.

  • Page 49: Shutdown Procedure

    Park Brake will engage when operator steps off platform or engine is shut off and spring- applied park brake pin is aligned between sprocket teeth. The brake will engage within 4" (10 cm) of travel. S450TX Mini Skid Steer Shutdown Procedure 23-1...
  • Page 50 This page intentionally left blank.

  • Page 51: Transporting The Machine

    Do not attempt to steer machine when balanced at trailer/ramp transition. • Position machine at location for tie-downs and weight distribution as recommended by trailer manufacturer. See “Machine Specifications” in the for tractor weights. Maintenance Manual S450TX Mini Skid Steer Transporting the Machine 30-1...

  • Page 52: Loading/Unloading

    To help avoid sudden stops, keep both feet fully on the platform and stand as far to the rear as practical. Slow down when traveling over uneven ground. 30-2 Transporting the Machine S450TX Mini Skid Steer...

  • Page 53: Driving Onto Trailer

    Stop machine when tie-down position is reached. Tie-down position distributes machine weight on the trailer as recommended by the trailer manufacturer. Step 8: Lower loader arms and adjust tilt until attachment is firmly on trailer deck. Step 9: Shut off engine and remove key. S450TX Mini Skid Steer Transporting the Machine 30-3...
  • Page 54 WARNING: Attachments could slip off the trailer after being disconnected from the machine, resulting in a crushing injury. When disconnecting and backing the machine away from the side of a trailer, take precautions to assure the attachments are properly secured to the trailer. 30-4 Transporting the Machine S450TX Mini Skid Steer...

  • Page 55: Driving Off Trailer

    Slowly move machine down the ramp to the ground. Minimize steering while on the ramps. Steering while on the ramps may result in the machine driving off the ramps or cause the ramps to move and drop off the trailer deck. S450TX Mini Skid Steer Transporting the Machine 30-5...

  • Page 56: Loading With Crane

    Refer to “Lift Arm Support Bar - Install/Remove,” page 60-2. Step 4: Follow Shutdown Procedure, page 23-1. Leave loader arms raised. Refer to “Lift Arm Support Bar - Install/Remove,” page 60-2. 30-6 Transporting the Machine S450TX Mini Skid Steer...
  • Page 57 Ensure pin operates freely after jam nut (5) is tightened. • Pin must align between sprocket teeth to engage park brake. Pin has to engage sprocket teeth by at least 5/8" (16 mm). S450TX Mini Skid Steer Transporting the Machine 30-7...
  • Page 58 Machine could roll downhill after Park Brake is released. If possible, ensure that machine is on a stable and reasonably level surface prior to attempting to retrieve. Proper chocking of tracks is critical to keep machine stationary until ready to tow. Park Brake is located on left side of machine. 30-8 Transporting the Machine S450TX Mini Skid Steer...

  • Page 59: Clean Machine

    Keep pressure washer stream away from machine controls and electrical/electronic devices. Compressed air can also push moisture through some connector and component seals. Do not point air nozzle directly at seal areas. S450TX Mini Skid Steer Transporting the Machine 30-9...
  • Page 60 This page intentionally left blank.

  • Page 61: Preparation

    The Operator Presence system is intended for your safety and must be maintained in good functional condition. Contact your Vermeer dealer if it does not function correctly. S450TX Mini Skid Steer Preparation 40-1...

  • Page 62: Personal Protection

    Eye protection must consist of wraparound safety glasses or goggles. Other workers in the immediate area must also wear hard hats, safety shoes, hearing protection, and eye protection. Avoid wearing jewelry, such as rings, wristwatches, necklaces, or bracelets. 40-2 Preparation S450TX Mini Skid Steer...

  • Page 63: Sound Levels

    Whole body vibration exposure has been measured according to ISO 2631. The level is less than 0.5 m/s Hand/arm vibration exposure has been measured according to ISO 5349. The level is less than 2.5 m/s S450TX Mini Skid Steer Preparation 40-3...

  • Page 64: Prepare The Area

    REPARE THE WARNING: Keep all spectators and other workers away from the machine and work area while in operation. 40-4 Preparation S450TX Mini Skid Steer...

  • Page 65: Underground Utility Contact

    If you do not call, you may have an accident or suffer injuries; cause interruption of services; damage the environment; or experience job delays. S450TX Mini Skid Steer Preparation 40-5...

  • Page 66: Look For Evidence Of Underground Placement

    If utility cannot be precisely located, it must be shut off by the utility company. Look for Evidence of Underground Placement Visually check for: • notices of underground placements • manhole covers • drop boxes • recent trenching activity 40-6 Preparation S450TX Mini Skid Steer...

  • Page 67: Striking A Utility

    WARNING: Laser light may damage eyes. Do not look into the end. Fiber optic cables carry laser light which may damage your eyes. If you are not sure what type of cable it is, do not look into the end. Contact appropriate utility company for assistance. S450TX Mini Skid Steer Preparation 40-7...

  • Page 68: Jobsite Assessment

    The operator or job foreman should also inspect the jobsite for: • holes, rocks, or other hidden hazards • traffic/site access Remove any obstacles or materials that could result in injury or damage the machine. 40-8 Preparation S450TX Mini Skid Steer...

  • Page 69: Prepare The Machine

    Ensure you understand and comply with all jobsite rules that might apply to your work situation. • If operating along a road, properly warn and divert motor and pedestrian traffic. Use all necessary signs, cones, flag persons, or lighting devices needed for the work situation. S450TX Mini Skid Steer Preparation 40-9...

  • Page 70: Attachments

    TTACHMENTS WARNING: Using attachments authorized by Vermeer Corporation is important for your safety. Using unauthorized attachments may cause difficulties with steering, stopping, stability and other undesirable performance or handling characteristics, or they may not attach securely to your machine. Never use unauthorized attachments.

  • Page 71: Attachment - Install

    Tops of pins must face inward as shown (3). NOTICE: Ensure pin ends extend through and are visible beneath attachment mount. If attachment requires hydraulic power, see “Hydraulics - Attach.” Refer to Step 9: “Hydraulics - Attach,” page 40-14. S450TX Mini Skid Steer Preparation 40-11...

  • Page 72: Attachment - Remove

    WARNING: Attachments could slip off the trailer after being disconnected from the machine, resulting in a crushing injury. When disconnecting and backing the machine away from the side of a trailer, take precautions to assure the attachments are properly secured to the trailer. 40-12 Preparation S450TX Mini Skid Steer...

  • Page 73: Hydraulics - Attach/Detach

    WARNING: Contact with hot hydraulic couplers, hoses, and fluid may result in burns. Wear gloves when connecting and disconnecting hydraulic hoses, and wait until unit has cooled before touching hydraulic components. NOTICE: Ensure all foreign matter is cleaned from hydraulic connectors before making connections. S450TX Mini Skid Steer Preparation 40-13...

  • Page 74: Hydraulics - Attach

    Turn key to STOP and remove key. Step 2: Align pin (2) with notch (3) on female coupler before disconnecting couplers. Step 3: Unhook hoses from auxiliary hydraulic couplers. Remove attachment from machine. 40-14 Preparation S450TX Mini Skid Steer...

  • Page 75: Operating The Machine

    Section 50: Operating the Machine APACITIES The S450TX has a rated operation capacity of 500 lb (226.8 kg) when tested in accordance with SAE J2752 and ISO 14397-1 standards. NOTICE: Ensure weight of attachment plus materials being handled does not exceed the machine’s operating capacity.

  • Page 76: While Driving

    Move Ground Drive Joystick slowly to start moving the machine smoothly. Avoid sudden stopping, starting, or turning unless necessary. WARNING: Rider may fall out and be killed or injured. Do not carry riders. 50-2 Operating the Machine S450TX Mini Skid Steer...
  • Page 77 Sudden stops from higher travel speeds could throw you from machine, or the machine could tip over. To help avoid sudden stops, keep both feet fully on the platform and stand as far to the rear as practical. Slow down when traveling over uneven ground. S450TX Mini Skid Steer Operating the Machine 50-3...

  • Page 78: Safe Operating On Slopes

    You may also need to keep heavy end uphill for added stability. Do not exceed rated load capacity. Load on firm and level ground. Do not step off platform with load raised. 50-4 Operating the Machine S450TX Mini Skid Steer...
  • Page 79 Service brake retarding force - equal to traction of both tracks • Secondary brake - equal to traction of one track • Park Brake holding force - equal to traction of one track S450TX Mini Skid Steer Operating the Machine 50-5...

  • Page 80: Operating The Mini Skid Steer

    The Operator Presence system in the operator platform detects the presence of an operator. The operator must be standing on the platform for the ground drive, lift/tilt functions, or auxiliary attachment drive to be engaged. Keep both feet on the platform. 50-6 Operating the Machine S450TX Mini Skid Steer...

  • Page 81: Bucket Operation

    40-10. Safety Precautions WARNING: Never work under an attachment unless it is adequately supported to prevent it from falling unexpectedly. WARNING: Falling load can crush. Keep load level when raising loader arms. S450TX Mini Skid Steer Operating the Machine 50-7...

  • Page 82: Moving Machine With Load

    Additional safety information is provided in this section. Refer to “Driving Safety,” page 50-1. • Do not step off operator’s platform when loader arms or attachment are raised. Machine stability is reduced and may cause machine to tip forward when you step off. 50-8 Operating the Machine S450TX Mini Skid Steer...

  • Page 83: Filling The Bucket

    Step 5: Continue driving machine forward until bucket is full. If ground is hard, tilt bucket forward and backward while driving slowly forward. When bucket is full, tilt bucket fully backward. Step 6: S450TX Mini Skid Steer Operating the Machine 50-9...

  • Page 84: Emptying The Bucket

    Step 3: Move machine in reverse to level loose material. Before moving forward, raise loader arms or tilt bucket back to lift the bucket cutting edge off the Step 4: ground. 50-10 Operating the Machine S450TX Mini Skid Steer...

  • Page 85: Backfilling With The Bucket

    THER ERMEER UTHORIZED TTACHMENTS Refer to the attachment manual supplied by the attachment manufacturer for operating and maintenance instructions for the attachment and additional instructions that may be required for the S450 S450TX Mini Skid Steer Operating the Machine 50-11...
  • Page 86 This page intentionally left blank.

  • Page 87: Maintenance Intervals

    Shutdown Procedure, page 23-1. Visually inspect machine daily before starting the machine. Make no modifications to your equipment unless specifically recommended by Vermeer Corporation. ELDING RECAUTIONS EVIEW NOTICE: Electronic modules and controllers can be damaged from stray voltages and currents generated during welding.

  • Page 88: Lift Arm Support Bar - Install/Remove

    Install support bar over lift arm cylinder as shown in bottom photo. Secure with pins (3). Refer to page Step 4: Shutdown Procedure, 23-1. When work is finished, return support bar to stow location. Install pins to Step 5: retain support bar in stow location. 60-2 Maintenance Intervals S450TX Mini Skid Steer...

  • Page 89: Shields - Install/Remove

    Lift up on side shields (3) to remove. Step 3: Remove ten bolts (circled; four on back side of machine are not shown). Remove lower access shield (4). Step 4: Reverse procedure to install shields. S450TX Mini Skid Steer Maintenance Intervals 60-3...

  • Page 90: Hourmeter - Check For Maintenance Interval

    = Initial maintenance on new machine. Regular maintenance interval may be different. Initial = Regular maintenance interval. For Vermeer maintenance replacement part numbers, refer to the Parts Manual or call your Vermeer dealer. Each maintenance interval is also a chapter title in the Maintenance Manual.
  • Page 91 Neutral Start Interlocks -  Check  Park Brake - Check Operator Presence System -  Check  Safety Signs Maintenance  Hydraulic System - Check Control Joystick and Levers -  Check S450TX Mini Skid Steer Maintenance Intervals 60-5...
  • Page 92 Engine System - Check  Battery - Replace Air Cleaner Element -  Replace  Track Tension - Adjust  Lift Arm Cylinders - Adjust  Handgrip Bar - Adjust  Storage Procedure 60-6 Maintenance Intervals S450TX Mini Skid Steer...

  • Page 93: Attachment Maintenance

    TTACHMENT AINTENANCE Refer to the attachment manuals provided by the attachment manufacturer. The attachment manuals must be attached to the machine together with the S450 Operator’s Manual. S450TX Mini Skid Steer Maintenance Intervals 60-7...
  • Page 94 This page intentionally left blank.
  • Page 95 Controls, 20-1 Fuses and Relays, 20-9 Crystalline Silica, 10-6 Gas, 40-7 Dealer Prep, i Dealer/Owner Information, iv Delivery, iii Hourmeter - Check for Maintenance Interval, 60-4 Diesel Fuel Engines - Sulfur Content, 12-1 Hydraulic Fluid, 22-2 S450TX Mini Skid Steer Index...
  • Page 96 Hydraulics - Attach/Detach, 40-13 Operating the Machine, 50-1 Hydraulics - Detach, 40-14 Operating the Mini Skid Steer, 50-6 Operating with Other Vermeer-Authorized Attachments, 50-11 Operator Presence Switch, 40-1 Identification Decals, vi Operator Presence System, 20-8 Identification Numbers - Record, v...
  • Page 97 Striking a Utility, 40-7 Towing the Machine, 30-6 Transporting the Machine, 30-1 Underground Utility Contact, 40-5 Vermeer GPS Tracking Equipment (Telematics), 16-1 Vermeer Productivity Tools, 16-1 Vibration Levels, 40-3 Welding Precautions - Review, 60-1 While Driving, 50-2 S450TX Mini Skid Steer...
  • Page 98 This page intentionally left blank.
  • Page 99 European CE Requirements for diesel machines. Third Edition Original English Manual released. o3_00 04/18 Sections 20, 22, 40, 60 Removed gas engine. Added Fuel recommendations. o3_01 11/19 Front, Section 16 Updated decals, included telematics. S450TX Mini Skid Steer Revision History...
  • Page 100 State of California to cause cancer, State of California to cause cancer birth defects, and other reproductive harm. and reproductive harm. Wash hands after handling. Copyright 2018, 2019. All rights reserved. Vermeer Corporation 1210 Vermeer Road East, P.O. Box 200 Pella, Iowa 50219-0200...

Table of Contents