Casio Exilim EX-Z1000 User Manual page 44

Turning On Power for the First Time
The first time you load a battery into the camera, a screen
appears for configuring screen text language, date, and time
settings. Use the procedure under "Configuring Display
Language, Date, and Time Settings" (page 12) to configure
the settings correctly.
IMPORTANT!
• Failure to set the date and time will cause the wrong
date and time data to be recorded with images.
• Leaving the camera for about one day with no power
supplied will cause the date and time settings to be
cleared. You will have to re-configure the settings after
power is restored. The following conditions will result in
no power being supplied to the camera.
– Battery not loaded or dead battery
– Battery not loaded or dead battery with the camera
on the cradle, but without the cradle plugged into a
power outlet
• If you make a mistake when configuring the language,
date, and time settings, you can change the settings
(pages 187, 191).
I
Battery Power Conservation Features
The camera is equipped with two features for conserving battery
power, as described below.
Feature
Description
Name
In the REC mode, the monitor screen
turns off (goes into a sleep state) if no
operation is preformed for a preset
Sleep amount of time. Press any button to
turn the monitor screen back on.
Note that the Sleep feature does not
operate in the PLAY mode.
Power it turned off if no operation is
Auto Power
performed for a preset amount of
Off
time.
1.
Press [MENU].
2.
Use [ ] and [ ] to select the "Set Up" tab.
3.
Use [ ] and [ ] to select the item you want to
configure ("Sleep" or "Auto Power Off") and
then press [ ].
44
Settings
30 sec,
1 min,
2 min,
Off
2 min,
5 min
GETTING READY