Specifying The Metering Mode - Casio Exilim EX-Z1000 User Manual

IMPORTANT!
• Using flash with high ISO sensitivity can cause problems
with subjects that close to the camera.
• "Auto" ISO sensitivity always is used for movies, regardless
of the current ISO sensitivity setting.
• You can use the key customization feature to configure the
[ ] and [ ] buttons so they control the ISO sensitivity
setting (page 132).

Specifying the Metering Mode

The metering mode determines what part of the subject is
metered for exposure.
1.
In the REC mode, press [MENU].
2.
On the "Quality" tab, select "Metering" and
then press [ ].
3.
Use [ ] and [ ] to select the setting you want
and then press [SET].
Multi (Multi Metering)
Multi-pattern metering divides the image into
sections and measures the light in each
section for a balanced exposure reading. The
camera automatically determines shooting
conditions according to the measured lighting pattern, and
makes exposure settings accordingly. This type of metering
provides error-free exposure settings for a wide range of
shooting conditions.
124
ADVANCED SETTINGS