[Int Video] Menu (Internal Video Setting) Screen - Panasonic AG-HMX100E Operating Instructions Manual

To set the audio output format and the operation of audio faders
Set [SOURCE] to [CP PAIR], [BUS SEP1], [BUS SEP2], [12 PAIR], or [12 SEPA.] using the rotary 2 control.
The following table shows the output method and audio input sources assigned to the faders for each setting.
Setting Output Method
CP PAIR Sound output of the
selected input source
BUS SEP1
BUS SEP2 When AB bus
system is selected
When Program/
Preset system is
selected
12 PAIR Fixed to sound of
input sources 1 and 2.
12 SEPA.
To set the operation of AUX and MIC
faders
Set [AUX/MIC] to [PAIR] or [SEPA.] (separate) using the
rotary 3 control. The operation of each fader varies with the
setting as described in the table shown below.
Setting AUX fader
PAIR L and R channels of
AUX input source
SEPA. L channel of AUX (or
MIC) input source*
* To adjust the audio level of the microphone, operate the
1
fader while holding down the SHIFT key.
28
SOURCE 1/5 Fader SOURCE 2/6 Fader
L and R channels of source L and R channels of source
1 (or 5) 2 (or 6)
L channel of A/PROG R channel of A/PROG
source source
L channel of A bus source R channel of A bus source
Preview button lighted: L Preview button lighted: R
channel of PROG source channel of PROG source
Preview button flashing: L Preview button flashing: R
channel of PRESET source channel of PRESET source
L and R channel of source 1 L and R channel of source 2 Not available
L channel of source 1 R channel of source 1
MIC fader
L and R channels of
MIC input source
R channel of AUX (or
MIC) input source*
1 1
SOURCE 3/7 Fader
L and R channels of source
3 (or 7)
L channel of B/PRESET
source
L channel of B bus source
Preview button lighted: L
channel of PRESET source
Preview button flashing: L
channel of PROG source
L channel of source 2
[INT VIDEO] Menu
(Internal Video Setting) Screen
When the INT VIDEO button is pressed, the [INT VIDEO]
menu screen appears as shown below.
This menu is used to set the internal video signal built in
this unit.
During color setting in the [INT VIDEO] menu, the joystick
and rotary Z control are in the color setting mode.
The color set from this menu is indicated in the internal
video display area.
WASH P 128 P 128
B R
Y 196
EVENT ME TIME
00 1:00
E F
INT VIDEO
BACK COLOR LEVEL
MATTE WHITE
COLOR
BAR
MEMORY PAGE FRAME
1
* # stands for a numeric value. (The maximum value varies
1
with the memory size (the number of frames) set in the
[MEMORY] submenu of the [SETUP] menu.)
SOURCE 4/8 Fader
L and R channels of source
4 (or 8)
R channel of B/PRESET
source
R channel of B bus source
Preview button lighted: R
channel of PRESET source
Preview button flashing: R
channel of PROG source
Not available
R channel of source 2
WHT
YELW
CYAN
GREN
MGT
RED
BLUE
BLK
CST 1
CST 2
CL BR
ST # *
1
MV # *
1
PATTERN INT
3001 BLUE
GRADE POS 80
PATTERN GRADE
255 H1 0
MODE
2 FRAME WRITE