Advertisement
Using the Remote Control
EQ button
Sound quality
Each time you press [EQ], while displayed
3D-1
3D-2
S-XBS
Sound
Enhanced
Boosts
field of
3D-1
the bass
3D
EQ OFF
["EQ" disappears from the display (canceled)]
≥The effect may differ with different kinds of music.
≥Depending on the recording conditions, sound may be interrupted
when switching between EQ settings.
≥If you select 3D-1 or 3D-2 then try playing a disc that contains both CD-ROM
format and CD-DA format tracks, there will be a brief noise when the disc
changes from playing the CD-ROM format track to the CD-DA format one.
≥If you select 3D-1 or 3D-2, increasing the unit's volume beyond 19
will not increase the volume output.
Remote control operation tone
Each time you press and hold [EQ]
BP OFF
Tone off
When the display is difficult to see
(On the main unit)
Set the main unit to HOLD while stopped. While pressing and
holding [1/;], press [r] (darker) or [s] (lighter).
To see the display in the dark
Each time you change the position of the hold switch on the
remote control, the display will light for around 5 seconds.
Program play (Desired tracks only )
While stopped, use [:] or [9] to select the track,
then press [ $ MEMO/ % DISP].
Track number Sequence number
CD-DA
3
01
M
Will appear after
[ $ MEMO/ % DISP] is
pressed
Repeat to program up to 20 tracks.
Play
1/∫
Confirm tracks
$ MEMO
Cancel
1/∫
Anti-skip mode
CD-DA
The anti-skip function (ANTI-SKIP SYSTEM) reduces or eliminates
skipping caused by vibration. You can change the anti-skip memory time.
While stopped, each time you press and hold [ $ MEMO/ % DISP]
POS 1
Anti-skip enhanced mode,
180-second anti-skip memory
You cannot change the memory time for MP3. It is a maximum of
≥
400 seconds for MP3 recorded at 128 kbps.
3D-1
S-XBSr
Enhanced
Reduces sound
S-XBS
listening fatigue
BP ON
Tone on
$ MEMO/ % DISP
MP3
01
Sequence number
3
1
ALBUM
Album number
Track number
Press after all desired tracks
have been programmed.
/
% DISP
Press during play.
Press during play.
("M"disappears.)
POS 2
Sound enhanced mode,
45-second anti-skip memory
MODE button
Play modes
Each time you press [MODE]
TRAIN
leaks and
1
`
`
One track
All track
repeat
repeat
≥You cannot select "RND" and "A ` B" while playing MP3.
∫Specifying the AB segment
Press [ $ MEMO/ % DISP] at the start point (A) and once more at the end point (B).
≥Stop or skip ( ➪ page 5) to cancel.
≥If you do not specify point B this will automatically be set as the end of the
disc. Repeat begins when this point is reached. You can specify point B
again by pressing [ $ MEMO/ % DISP].
Album mode (Play only the tracks in a selected album)
MP3
Each time you press and hold [MODE]
Album mode
≥To select another album ( ➪ page 5, Album skip)
≥You cannot turn album mode on during program play ( ➪ below).
button
Display changes
Each time you press and hold [ $ MEMO/ % DISP] during
play
Album
M
title
M
≥" ~ " is displayed in place of anything over 32 characters.
≥"_" is displayed in place of characters this unit cannot
display.
" appears if ID3 tags haven't been entered.
≥"
Digital Re-master (Enjoy more natural sound)
MP3
You can regenerate signal frequency lost during compression,
restoring the sound to near pre-compression form.
While stopped, each time you press and hold
[ $ MEMO/ % DISP]
RM ON
Sound enhanced
6
`
RND
RND
Random
Random
repeat
No display (canceled)
No display
(canceled)
MP3
ID3
ID3
Track
artist
track
title
name
title
(Id3
)
(Id3
RM OFF
Conserves battery life
During play
or
While paused
A
`
B
AB repeat
( ➪ below)
Track number
and elapsed
play time
)
RQT7719
Advertisement
