Page 1
SmartRoom Wireless Gateway Quick Guide Please refer to the software instruction manual or download the Software Download Guidance for more information if it is necessary.
Page 4
Trademark SmartRoom, IOT Sensor, Wulian are all the registered trademarks of Nanjing IOT Sensor Technology Co., Ltd. Usage of these trademarks is strictly prohibited without the written authorization and permission from Nanjing IOT Sensor Technology Co., Ltd. Legal action will be taken against unauthorized use of these trademarks.
Basic Function ● The central hub of smart home devices ● Standard Ethernet port. Allow ZigBee wireless network to join in the internet or LAN ● Control with specific software. High Security protection ● Stylish appearance. Various colors are offered. It has wide application range ●Built-in WiFi function.(This function is only provided in 03 or above generation gateway)
Networking Setting 1. Connect the power. Power Indicator light stays lit, which means power is connected successfully. Connect network cable and make sure the Ethernet configuration is finished. Ethernet Indicator Light stays lit which means Ethernet is connected successfully. Ethernet Indicator Light Note: System Indicator Lightflickers which means system runs successfully.
Page 8
Networking Setting 2. When fist start up network, press SET Key 4 times quickly. ZigBee Network Indicator Light flickers quickly. After starting up the network, ZigBee Network Indicator Light stays lit for 2 seconds and then goes out. Then, it flashes once per second, which means ZigBee network is working.
Page 9
Networking Setting 3. Press SET Key 4 times quickly. ZigBee Network Setting Indicator Light stays lit which means other devices are able to join the network. (Other devices must join the network within 4 minutes. When time is up, ZigBee Network Setting Indicator Light goes out.) 4.
Page 10
Networking Setting 5. Press SYS Key, the device is initialized. SYS Key Note: Press SYS Key 10 seconds, network restores to factory setting (2nd Generation gateway and above versions are equipped with this function)
Page 11
Usage 1. When the gateway allows other devices to join the network, user can configure other devices to join the network. For more information, please consult the instruction manual of the device. 2. Please refer to the Software Download Guidance for more details if user controls the devices within the network through any mobile smart terminals.
Product Standard Communication Mode IEEE802.15.4(ZigBee) Communication Distance 1000m( visible) Network Access Method Wired Network / WiFi / 3G ZigBee Transmitting Power MAX 18 dBm ZigBee Receiving Sensitivity -90 dBm Power Demand 5V DC Working Temperature -10℃~+55℃ Weight 310g Net Weight...
Ordering Information Ordering Name Model Art. No WL-SR-GW-01 SRPN1307602 Wireless Gateway WL-SR-GW-02 SRPN1308602 WL-SR-GW-03 SRPN1308703 Package Size 260×160×40mm...
Page 16
B14 Software Valley, NO.15, Fengji Avenue, Yuhuatai District, NanJing Service hotline :400-928-9288 www.wulian.cc/english/...