Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ZIGBEE SEG-X3
Summary of Contents for ZIGBEE SEG-X3
- Page 1 SEG-X3 Smart Gateway Quick Start Guide...
-
Page 2: Get To Know Your Device
1. Introduction The SEG-X3 Smart Gateway acts as a central platform for your smart home system. It allows you to add ZigBee devices into the system while at the same time connect to the Internet, to be controlled by the mobile app. - Page 3 Models are available in these sockets 2.2. Buttons “Z” button Permit device pairing Reset the ZigBee network Wi-Fi button Reset the Wi-Fi network Switch between cloud mode and AP (Access Point) mode Open WPS mode Reset button ...
- Page 4 The SEG-X3 is in permit joining mode Blue LED solid which means that it allows other ZigBee devices to join its network. The SEG-X3 is in cloud mode which means Blue LED flashing that it is connecting to the cloud server. Orange LED and...
-
Page 5: Get Started
AP mode) Tip: If the LED indicator is not flashing purple, please reset the SEG-X3 gateway to default factory settings by pressing and holding the reset button for ten seconds. Step 2: Ensure your smartphone is connect to the Wi-Fi Step 3: Install the mobile app from Google “play store”... - Page 6 A5: Tap the “Adding new devices” of the mobile app to allow other ZigBee devices to join its network. Tip: You could also press the “Z” button until the blue LED indicator turns solid blue to allow ZigBee devices to join the network, then set...
- Page 7 A7: You can only use the system locally on Android device by following the steps below; Step 1: Connect your smartphone to the Wi-Fi hotspot of the SEG-X3 Smart Gateway which starts with “ZB” and ends in six digits. Step 2: Open the mobile app and tap “Direct Link” at the bottom left.
-
Page 8: Technical Specifications
Flash ROM 256k Data Interface Micro USB port Data Storage Capacity TF Card: 8G Wireless Connectivity ZigBee, Wi-Fi Operating frequency: 2.4 GHz RF Characteristics Internal PCB Antenna Range outdoor/indoor: 100m/30m AC 100 to 240 V, 50 to 60 Hz Power Supply... -
Page 9: Software Specification
Home Automation Profile Data format: JSON Downlink commands Gateway Operation Command HAN Control Command Data format: JSON Uplink Messages Home Area Network Information Device Data Authentication Password protection on mobile apps Security Server / gateway interface authentication ZigBee Security Preconfigured Link Key... -
Page 10: Safety Notice
6. Safety Notice WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the device or other property. Read all the safety notices below before using the device. Avoid high humidity or extreme temperatures. ...