Network Appliance DiskShelf14 Hardware And Service Manual page 60

50
Step Action
The following figure shows how to raise the handle into place.
3
If the disk shelf has...
An AC power supply
A DC power supply
4 Turn on the power switch.
Then...
1. Plug the power cord into the power
receptacle and fasten it with the
clamp.
2. Plug the other end of the power cord
into a grounded AC power source.
1. Connect the positive, negative, and
ground wires to the power supply.
2. Plug the other end of each power
cord into a power source.
Replacing a power supply in a disk shelf