Your Scooter Controls - TGA BREEZE S Operating Instructions And Owner's Handbook

Your scooter controls

1. Speed Control Lever – Speed is
controlled by the lever located on the right-
hand handlebar (left-hand option available).
Always use the lever gently. The more you
pull the lever towards you, the quicker you
will go. To stop, release the lever.
2. Emergency Brake – All braking is
automatic and the emergency hand brake
should never need to be used. It is only for
emergency use in the unlikely event that the
automatic braking fails.
3. Horn – Buttons located either side of
handlebar. The horn will automatically sound
when using reverse.
4. Indicators – Left and right-hand. Push
the switch in the same direction as you need
to turn. To turn off, return the switch to the
central position.
5. Indicator Warning Lights – Shows when
using indicators.
6. Hazard Warning Light Switch –
Operates all indicator lights together. For
emergency use only. Audible warning
option available.
7. Head Light Switch – This switches on
front and rear lights.
8. Head Light Warning Light – Shows
when lights are in use.
9. Power On/Off Switch – With a
removable key.
10. Forward/Reverse Switch – Select your
desired direction by pressing the switch as
marked. When using reverse the horn will
sound.
WARNING!
complete stop before changing direction.
11. Speed Selector Switch – This has
two positions, '1' which is the high speed
(approx 8 mph - see warning on p5) and
'1/2' which is the slow speed (approx 4mph).
12. Brake Release Button – Switch on the
keyswitch and squeeze the button located
at the front of the right-hand handlebar. This
will release the brake and allow the scooter
to be moved manually.
Always come to a
13. Battery Condition Indicator – When
all 10 segments are showing it indicates you
have fully charged batteries. When you get
down to the last 2 segments it is important
to recharge as soon as possible.
14. Speed Indicator Display – Displays
speed in mph or kph.
15. Mode Button – This button will change
the digital reading from speed to distance
or time travelled. To reset, press Mode until
the time or distance is showing and then
hold mode for 7 seconds.
16. Set Up Button – For setting up time
and date. To set up / change the time or
date, press Mode until the clock is showing
and then hold Mode for 7 seconds. In set up
mode use the Mode button to select each
unit of time.
NOTE:
The Speed Control Lever is also fitted
with a panic sensor which is activated
if the lever is pulled in hard against the
handlebar. If this happens all power
to the motor with be shut down and
the brakes will come on immediately
causing the machine to stop very
suddenly. Please be aware of this fact
and brace yourself accordingly. This is
intended for emergency use. In normal
use, take care not to pull the lever
hard onto the handlebar. It is best to
familiarise yourself with this safety
device.
4