Panasonic DVD-S49 Operating Instructions Manual page 21

≥ Restore the zoom ratio to a1.00. (9)
Menu not displayed
≥ Set "Subtitle Position" in Display Menu to "0". (14)
correctly.
≥ Set "4:3 Aspect" in Display Menu to "Normal". (14)
≥ Turn off TV's zoom function.
Auto zoom
≥ Use the other preset aspect ratios or manual adjustment. (9)
function does not
≥ Zoom function may not work well, especially in dark scenes
work well.
and may not work depending on the type of disc.
Progressive video
≥ This problem is caused by the editing method or material
There is ghosting
used on DVD-Video, but should be corrected if you use
when progressive
interlace output. Change "Video Output Mode" in Picture
output is on.
Menu to "xxxi" (interlace). (14)
≥ If the unit is connected to the television through VIDEO OUT
Pictures not in
progressive output. or S VIDEO OUT, output will be interlace.
Sound incorrect
≥ Set "Advanced Surround" in Audio Menu to "Off". (14)
Sound distorted.
≥ Set "Attenuator" in Audio Menu to "On" if it causes distortion
with 2 ch or 5.1ch AUDIO OUT connections. (14)
≥ The disc may have restrictions on the method of audio
output. With some multi-channel discs, unless the number of
connected speakers is the same as the disc's channel
specification, audio will not be output properly. Refer to the
disc's jacket for more information. [DVD-A]
≥Match the speaker settings with the connected equipment. (18)
≥ If you have connected a digital amplifier which does not
Piercing noise
include decoder, be sure to select "PCM" in "Dolby Digital",
comes from the
"DTS Digital Surround" or "MPEG
speakers.
≥ None of the audio effects work when the unit is outputting
Effects do not
bitstream signals from the DIGITAL AUDIO OUT terminal. (5)
work.
≥ Some audio effects do not work or have less effect with some discs.
≥ Multi Re-master, Advanced Surround and Sound Enhancement
do not work if you have changed the play speed.
≥ There may be a pause in sound when you change the play speed.
No sound
≥ Audio may not be output due to how files were created. [DivX] (12)
Recording
≥ You cannot record WMA/MP3.
Cannot record to
≥ You cannot record DVDs that have protection preventing
digital recording
digital recording.
equipment.
≥ You cannot record DVDs if the recording equipment cannot
(Incorrect sound
handle signals with a sampling frequency of 48 kHz.
≥ Make the following settings:
recorded.)
– Advanced Surround:
– PCM Digital Output:
– Dolby Digital/DTS Digital Surround/MPEG
Unit displays
"NOPLAY"
"U11"
"H∑∑"
(∑∑ stands for a
number.)
"NODISC"
Television displays
"/"
"Cannot play group xx,
content xx"
"Cannot display group
xx, content xx"
"Group xx, content
xx is protected"
"Cannot play audio"
"No audio"
"Check the disc"
§1
" in "Audio" tab. (17)
"This disc may not
be played in your
region"
No on-screen display.
"Authorization Error" ≥ You are trying to play the DivX VOD content that was
"Rented Movie
Expired"
"Rental Expired"
§1 MPEG: [Except\Asia]
§2 [Except\Asia]
§3 \Asia]
Off (14)
Up to 48 kHz (17)
§1
: PCM (17)
≥ You inserted a disc the unit cannot play; insert one it can. (3)
≥ You inserted a blank disc.
≥ You inserted a disc that has not been finalized. (3)
≥ The disc may be dirty. (3)
≥ Trouble may have occurred. The number following "H"
depends on the status of the unit. Turn the unit off and then
back to ON. Alternatively, turn the unit off, disconnect the AC
mains lead, and then reconnect it.
≥ If the service numbers fail to clear, note the service number
and contact a qualified service person.
≥ You haven't inserted a disc: Insert one.
≥ You haven't inserted the disc correctly: Insert it correctly. (6)
≥ The operation is prohibited by the unit or disc.
≥ You are trying to play incompatible group or content. (12)
≥ You are trying to play protected group or content. You cannot
play it.
≥ Audio has not been recorded, or recorded in a format this unit
cannot playback. Video playback only is possible. (12)
≥ This disc may be dirty. (3)
≥ You can only play DVD-Video if their region number is the
same or includes the same region number as the unit or if the
DVD-Video is marked "ALL". Confirm the region number for
the unit on the rear panel. (Cover)
≥ Select "On" in "On-Screen Messages" in "Display" tab. (17)
purchased with a different registration code. You cannot play
the content on this unit. [DivX] (19)
≥ The DivX VOD content has zero remaining plays. You cannot
play it. [DivX] (19)
§2
§3
21