Table of Contents
Advertisement
Attaching / Detaching (Continued)
Tab
Fixing screw
(M3 x 6 mm)
DC motor unit
2)
Pull the cover tab to raise
up the cover and then
remove the cover.
3)
Remove the one fixing
screw (M3 x 6 mm) from
the DC motor unit.
4)
Place the lens upside
down.
z When the lens is turned
upside down, one person
should hold the DC motor unit
so that it does not become
detached and fall.
Note
z If the DC motor unit is detached
without turning the lens upside
down, a gear of the DC motor unit
may fall off.
5)
Remove the DC motor
unit by pulling it down in a
diagonal direction.
ENGLISH-7
Advertisement
Table of Contents
