Widearea AEP-RACK-L Installation Manual

Adsl loop extender power supply

Advertisement

Please read this
document carefully
before installation!
ADSL Loop Extender Power Supply
AEP-RACK-L & AEP-C2PL
Installation Manual
Version: 7.0
Chengdu Widearea Telecommunication Technology Co., Ltd
nd
rd
Add: 2
,3
East Round Longtan Industry Garden 10#,Chengdu, Sichuan, China
Tel: (86)28 84207501 (86)28 84207506
Fax: (86)28 84209696
E-mail:
master@widearea.com.cn
Web Site: http://www.widearea.com.cn

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AEP-RACK-L and is the answer not in the manual?

Questions and answers

Summary of Contents for Widearea AEP-RACK-L

  • Page 1 ADSL Loop Extender Power Supply AEP-RACK-L & AEP-C2PL Installation Manual Version: 7.0 Chengdu Widearea Telecommunication Technology Co., Ltd Add: 2 East Round Longtan Industry Garden 10#,Chengdu, Sichuan, China Tel: (86)28 84207501 (86)28 84207506 Fax: (86)28 84209696 E-mail: master@widearea.com.cn...
  • Page 2  All brand names and trademarks are the property of their respective owners. This publication may not be reproduced in whole or in part without the express written permission of Widearea.
  • Page 3: Table Of Contents

    2. Technical Specifications .............. 4 3. Physical Structure ................ 4 4. Application .................. 5 5. Installation Procedure ..............6 6. Troubleshooting ................8 This publication may not be reproduced in whole or in part without the express written permission of Widearea.
  • Page 4: General Description

    You can use the ADSL Loop Extender Power Supply to provide the span-power. Figure 1 AEP-RACK-L and the power card AEP-C2PL  AEP-RACK-L is a rack for AEP-C2PL embedded. One rack can be inserted into 14 cards.  AEP-C2PL is two outlets power supply for line power supply ADSL Loop Extender AER800-xPL.
  • Page 5: Technical Specifications

    ADSL Loop Extender Power Supply Installation Manual Page 4  Comprehensive over-voltage protection.  Easy to install, deploy and maintain 2. Technical Specifications Table 1 –Technical Specifications of AEP-RACK-L& AEP-C2PL Temperature -10℃~+45℃ Operating Environment 5%~95% Relative Humidity (Non-condensing) Input Voltage DC -48V(-36V~-72V)...
  • Page 6: Application

    “B3” line sequence, to input correctly, the light will be off. 4. Application POTS switch Power Supply ADSL+PO ADSL ADSL AEP-RACK ADSL+POT DSLAM splitter Loop AEP-C2PL Mode Extender This publication may not be reproduced in whole or in part without the express written permission of Widearea.
  • Page 7: Installation Procedure

    DC 155V. Do not touch wire A and wire B simultaneously, or allow wires to contact anything! ⑴ Fix the AEP-RACK-L in the 19’ cabinet and ground the AEP-RACK-L. Attention: Cooper-core wire with no less than 2.5mm2 section is required as ground wire.
  • Page 8 ADSL Loop Extender Power Supply Installation Manual Page 7 of the AEP-RACK-L, the other end of the wire should be connected to a good ground point. ⑵ Insert Power Supply card AEP-C2PL into AEP-RACK-L. ⑶ Connect the power supply cable No additional copper pair is required for power.
  • Page 9: Troubleshooting

    Output is OK but ADSL Signal cable connection is installation manual of extender does not work. error or short ADSL Loop Extender. This publication may not be reproduced in whole or in part without the express written permission of Widearea.

This manual is also suitable for:

Aep-c2pl

Table of Contents