Table of Contents
Advertisement
use the right tool for the job. Do not attempt to force a small tool or
5.
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better
and more safely at the rate for which it was intended. Do not modify this
tool and do not use this tool for a purpose for which it was not intended.
dress properly. Do not wear loose clothing or jewelry as they can be caught
6.
in moving parts. Protective, electrically non-conductive clothes and non-skid
footwear are recommended when working. Wear restrictive hair covering to
contain long hair.
use eye and ear protection. Always wear ANSI approved impact safety goggles
.
when working. Wear a full face shield if you are producing metal filings or wood
chips. Wear an ANSI approved dust mask or respirator when working around
metal, wood, and chemical dusts and mists.
8.
do not overreach. Keep proper footing and balance at all times. Do not reach
over or across running machines.
maintain tools with care. Keep tools maintained and clean for better and safer
9.
performance. Follow instructions for lubricating and changing accessories. The
handles must be kept clean, dry, and free from oil and grease at all times.
remove adjusting keys and wrenches. Check that keys and adjusting wrenches
10.
are removed from the tool or machine work surface before beginning work.
11.
Avoid unintentional operation. Be sure all safety precautions are followed, lift
is secure and vehicle is properly positioned before operating this jack. Always
think several steps ahead of your current operation to ensure safety.
stay alert. Watch what you are doing, use common sense. Do not operate any
12.
tool when you are tired or using any medication.
check for damaged parts. Before using any tool, any part that appears dam-
13.
aged should be carefully checked to determine that it will operate properly and
perform its intended function. Check for alignment and binding of moving parts;
any broken parts or mounting fixtures; noisy, loose or damaged roller guides
(19); and any other condition that may affect proper operation. Any part that is
damaged should be properly repaired or replaced by a qualified technician. Do
not use the tool if any control does not operate properly.
replacement parts and accessories. When servicing, use only identical
14.
replacement parts. Use of any other parts will void the warranty. Only use ac-
cessories intended for use with this tool. Approved parts and accessories are
available from Harbor Freight Tools.
do not operate tool if under the influence of alcohol or drugs. Read warning
15.
labels on prescriptions to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
maintenance. For your safety, service and maintenance should be performed
16.
regularly by a qualified technician.
SKU 94835
For technical questions please call 1-800-444-3353
Page 3
Advertisement
Table of Contents
