Information Of Jigs, Tools And Testers - Ricoh Pentax K-50 Service Manual

Information of Jigs, Tools and Testers for 77750
* Exclusive use for 77750 (K-50)
Program soft for 77750 K-50(For SLR/digital/SR)
For77420 (K-r)
DC coupler D-DC109 (Battery level adjustment/ Battery consumption check)
*When adjusting battery level, affix insulation tape on Battery adaptor.
For77170(K-2000)
Temporary bottom cover (For M100 adjustment, Handmade)
2 SD card (32MB or above)
(For FW, test shooting --- Recommend 512MB or above)
For76830(K-10D)
K10D Master body for calibration
Ricoh imaging will rend the master body. Please contact with us.
F5.6 Set plate for D20 (95901 D20)
--- *If you have D20-01, you do not need set plate.
F5.6 Set plate A (For Lens ID No.101~130)
F5.6 Set plate B (For Lens ID No.1~99)
DC code (connect with power supply or DC adaptor, Battery consumption check)
For76700(K100D)
76700 SR adjusting Jig (required AC100V)
[Caution] If your area is not 100V, you must provide transformer at locally.
76700 SR unit adjusting base
SR gain chart (The same as K100D)
AC adaptor kit (D-AC76 (-AC10),AC cable)
*Others --- Common with 76700(K100D)
(Refer to service manual for 76700)
Prepare
temporary bottom cover
Equipment:Ａ150(front cover), A401(Bottom cover)
For M100 adjustment
Handmade
77750 - 12/12 -
Order No.
No.95901-P426
Provide locally
◆DC coupler and DC code
No. 95901-D27-00A
No.95901-D27-00B
No.95901-D25
No.95901-J140
No.95901-J141
Cut off A150, A401