Setting Channels With Video Interface; Using The Keypad; Groups - Leprecon LPC-48V Quick Start Manual

The choice of 'wide' or 'two scene' operation is in the setup menu.
Switching between manual and submaster mode for the bottom bank of faders is done
with a front panel switch.

4.2. Setting channels with video interface

If a touch screen is connected, touch a channel selection to capture it. The channel
number and level field will turn green. Use the level slider to set the channel levels. If
there is not a touch screen installed, clicking with the mouse has the same effect.
Touching or clicking channels will select and de-select them. A group of channels can be
set using the 'thru' contol, using either the screen control or the front panel switch.
The 'release' control deselects channels, and the green highlight disappears. New
channels can now be selected. The 'release' key on the front panel works the same way.
Pressing 'Clear' plus 'Enter' will set all channels to zero, including manual faders.

4.3. Using the keypad

LPC includes a numeric keypad and function keys to set channel levels.
Pressing the 'channel' key brings up the dialog for selecting and setting channel levels.
Channel xx thru xx at Level xx Enter
With channels selected, use the level slider to tweak levels.
Repeating the channel selection process allows a new group of channels to be selected.

4.5. Groups

Any set of selected channels can be saved as a group. This provides a shortcut for using
the same channels again later for cue or submaster recording.
In any Run or Record screen, press the Group key on the front panel, or click on the word
'group' at the bottom of the screen.
9