Quick Guide; To Watch The Playback Picture - Panasonic AG-EZ50UP Operating Instructions Manual

1
2
3
1
4
2
OPEN / EJECT
3
PUSH
TO CLOSE
CAMERA
5
VCR
CARD P.B.
MODE
ON
OFF
POWER
4
6
BACK
7
LIGHT
6
SEARCH
7
CAMERA
VCR
CARD P.B.
MODE
ON
OFF
POWER
8

Quick Guide

1
Charge the Battery.
≥Connect the AC Cable to the AC Adaptor and AC Jack.
≥Attach the Battery to the AC Adaptor. (This will start the charging
process.)
≥When the Charge Lamp [CHARGE] goes off, the Battery is fully
charged.
≥Since the Battery will not be charged when the DC Cable is connected
CAMERA
VCR
to the AC Adaptor, disconnect it.
CARD P.B.
MODE
ON
OFF
POWER
2
Attach the Charged Battery to the Camera/Recorder.
≥Attach the battery after tilting the Viewfinder upward.
3
Turn the Camera/Recorder on.
≥Slide the
4
Insert the Cassette.
≥Slide the
compartment cover.
≥Insert the Cassette.
≥Press the [PUSH/TO CLOSE]
≥Close the lower compartment Cover.
5
Start recording.
≥Press the
≥Press the
CAMERA
VCR

To watch the Playback Picture

CARD P.B.
6
Switch to the VCR Mode, rewind the tape, and play the tape
MODE
ON
OFF
back.
(l 28)
POWER
≥Slide the
5
≥Press the
≥Press the
7
Turn the Camera/Recorder off.
≥Set the
(l 12)
1
Switch to [ON]. (The [CAMERA] Lamp lights up.)
(l 13)
2
Lever to the right and pull down to open the Cassette
3
to load the Cassette.
(l 20)
4
Button. (Recording starts.)
4
Button again to pause the recording.
5
Switch. (The [VCR] Lamp lights up.)
6
Button.
7
Button. (This will start playback.)
8
Switch to [OFF].
(l 12)
(l 14)
)
(l 14
7