Mediroyal NRX Strap 110 Quick Start Manual

NRX Knee Ligament
®

Material

NRX
2
Apply the thigh and calf anchors with some compression and fixate them with
the hook tabs.
3
Attach the first side wrap onto the backside of the medial part of the calf anchor. Pull the strap externally with an even
tension wrapping the strap just under the patella, covering the lateral collateral ligament and attach it on the lateral side of
the thigh anchor.
Mediroyal Nordic AB · Box 7052 · 192 07 Sollentuna · Sweden · Tel +46 8 506 766 00 · info@mediroyal.se · www.mediroyal.se
Strap 110 mm, NRX Strap PLUS 50 mm or 80 mm
® ®
© Mediroyal Nordic AB 2019
– One strap, unlimited options!
1
Cut a thigh- and calf anchor from
the 110 mm NRX
hook piece onto one of the sides.
Then cut two side wraps that should
be equally long and with a width
of 80–90 mm from NRX
110 mm. The alternative could be
to use the NRX
mm for more stability. Attach hook
tabs to each end. Then last cut two
reinforcement straps from 50 mm
NRX Strap PLUS and attach hooks
®
on each end.
Strap. Attach one
®
Strap
®
Strap PLUS in 80
®