Listening To Recorded Messages - Panasonic KX-PW95CL Quick Reference Manual

Operating the built-in answering device
Activating the answering device
1
Turn the (Auto answer) light on by pressing
2
When receiving a call, a greeting message will be
played and the unit will record a voice message.
To record your own greeting message, see page 16.
G

Listening to recorded messages

When new messages are recorded, the
answer) light will flash.
Press to listen to recorded messages.
After the messages are played back, the following will be
displayed.
I To erase the messages, press
I To save the messages, press
Listening to all of the recorded
messages
Press or
After the messages are played back, the following will be
displayed.
I To erase the messages, press
I To save the messages, press
Erasing a specific message
Press (Erase) while listening to the message you
want to erase, then press
Erasing all of the recorded messages
1
Press (Erase).
2
Press .
light on/flash
(Auto
.
ｻ ｲ ｾ ｲ ｼ ﾀ ﾖ ｳ ｹ ﾝ ｼ ｮ ｳ ｷ ｮ
ｽ ﾙ =ｱ ｱ ｼ ﾅ ｲ = #
.
(Replay).
.
ｻ ｲ ｾ ｲ ｼ ﾀ ﾖ ｳ ｹ ﾝ ｼ ｮ ｳ ｷ ｮ
ｽ ﾙ =ｱ ｱ ｼ ﾅ ｲ = #
.
.
ｽ ﾍ ﾞ ﾃ ｾ ｼ ｮ ｳ ｷ ｮ ｼ ﾏ ｽ ｶ ?
ﾊ ｲ =ｱ ｱ ｲ ｲ ｴ = #
Operating the answering device
from a remote location
.
Preparation: Programming the remote operation ID
1. Press
2. Press
3. Enter any 4-digit number (remote operation ID) except
or #.
4. Press
5. Press (Stop).
Operation: Listening to a recorded message from a
remote location
Turn the (Auto answer) light on before you go out.
Remote operations are available only from a touch tone
telephone.
1. Call your unit.
2. Enter the remote operation ID during the greeting
message.
3. Press or wait 4 seconds.
2
Only the new recorded messages will be played
G
back.
G To listen to all the recorded messages, press
after the new messages have been played back.
light on/flash
(Function/Edit).
.
ｱ ﾝ ｼ ｮ ｳ
Example :
ｱ ｱ ｱ
(Set/Register).
ｱ No. = 1234 1
[ 4 ｹ ﾀ , ﾄ ｳ ﾛ ｸ ] ｵ ｽ
4
17