• DO NOT operate during freezing conditions. Drain MagFlo Pump and store in a protected location. IMPORTANT: The Pond Guy is not responsible for equipment damage or failure, losses, injury or death resulting from failure to follow safety precautions, or from misuse or abuse of equipment.
Package Contents MAGFLO PUMP: *The Wide Water Bell Spray Pattern Deflector Disc is an optional disc for the Water Bell Spray Pattern (H). Utilize when a wider pattern is desired. thepondguy.com | 866-POND-HELP (766-3435)
INSTALLING YOUR MAGFLO PUMP: For Best Results • MagFlo Pump should be placed on a flat • Keep MagFlo Pump pre-filter free of surface away from sludge or algae mats. debris. • DO NOT run the pump dry. To prevent •...
Page 5
INSTALLING YOUR MAGFLO PUMP CONT: Waterfall/Feature Only Attach outlet male tubing adapter (F) to pump outlet of MagFlo pump (A). Connect and secure pond tubing to tubing adapter (F) with a hose clamp (not included). Connect pond tubing to your waterfall or water feature. ...
INSTALLING YOUR MAGFLO PUMP CONT: Step 4 Adjust Water Flow Adjust water flow using the diverter valve flow control located on the diverter assembly (C), if applicable for your installation. Step 5 Adjust Fountain Spray For the water bell spray pattern (H), it may be necessary to unscrew or tighten the deflector disc on the top of the nozzle for proper flow.
Page 7
MAINTAINING YOUR MAGFLO PUMP CONT: Step 2 Remove Pre-Filter Pull firmly to remove the pump pre-filter from the pump motor. Step 3 Wash Pre-Filter Sponge & Impeller Screen Remove pump pre-filter sponge and impeller screen. Wash thoroughly with water. Step 4 Remove Impeller Cover &...
¾”, 1” & 1¼” Note: Diverter discharge accepts 1/2” & 3/4” fittings. PRODUCT WARRANTY: THANK YOU FOR CHOOSING: MagFlo Pumps carry a 5-year warranty. The Pond Guy The Pond Guy Inc . ® will repair or replace any unit found to be defective. This...
Need help?
Do you have a question about the MagFlo Series and is the answer not in the manual?
Questions and answers