Sprayer Assembly - Bartell Global S151 Owner's Manual

S151, S201
OWNER'S MANUAL

Sprayer Assembly

Your new Power Sprayer will arrive with everything you
need in one shipping carton. Be sure to examine the
content to be certain that the following items were
included:
Return Hose: ½" hose/pipe
Suction Hose: ¾" hose/pipe
Sprayer Wand Assembly: 25 ft. of 3/8" hose and (2) 3/8"
pipes with a coupler
1. Remove the sprayer from the carton and place it on the
curing drum you will be using. The sprayer should be
mounted so that the openings on the drum are accessible
on either side of the sprayer. Tighten the hold down tabs
on the sprayer to the drum.
2. Attach the suction hose/pipe to the sprayer using the
fitting mounted directly to the pump. (See Fig. 4)
3. Attach the fitting end of the return hose/pipe to the
sprayer using the ½" connection on the spray block
assembly. (See Fig. 5)
4. Join the two sections of the sprayer wand together
using the pipe coupling provided. (See Fig. 6)
5. Attach the spray hose to the last fitting on the sprayer
block assembly. (See Fig. 6) You are now ready to begin
operation of the sprayer.
11
OI-M09205