Bartell Global S151 Owner's Manual page 11

S151, S201
OWNER'S MANUAL
failure.
• NEVER perform maintenance on a running piece of equipment. Shut down the
engine and allow it to cool before servicing the power sprayer, including
mechanical work or lubrication.
• ALWAYS replace missing, damaged, or unclear safety
labels to ensure operator awareness and safety.
• NEVER operate the power sprayer with missing or
damaged safety guards. Replace immediately with
appropriate Morrison parts.
• NEVER put hands, feet, or other appendages inside the
belt guard while the engine is running, even at idle or
with protective clothing, as serious injury may result.
• NEVER wear loose fitting clothing or jewelry around rotating equipment such
as the power sprayer as it may become entangled in the machinery, resulting
in serious injury.
• ALWAYS refuel the power sprayer in a well-ventilated area,
away from ignition sources such as sparks, flames, and lit
cigarettes. Smoking while fuelling the equipment may result in
explosion.
• Ensure the engine has cooled sufficiently before refueling to
avoid igniting gasoline fumes.
• NEVER operate the power sprayer in explosive environments
such as paint fumes, methane, natural gas, fine particulate,
aerosol propellant, or solvent fumes.
• NEVER smoke near the power sprayer as stray gasoline fumes
may ignite. Operating the power sprayer around an open flame
may also result in explosion.
• ALWAYS shut down the engine and allow it to cool off before lifting or
transporting the power sprayer.
• ALWAYS tie down the power sprayer when being transported in a truck or on
a flatbed. Empty the fuel tank if transporting it over long distances.
10
OI-M09205