CEBEK TL-6 Manual

The TL-6 is a 2 channels remote controle mitter supplied by 12VDC working by radio-frequency and emitting a codified signal which
could be recognise by any CEBEK receiver module (TL-1,TL-2,TL-3,TL-4).
You could configure your own security code (between 13.122 possibilities).
It includes micro-switches to select the code, indicator led and 12VDC battery and corresponding enclosure.
Do not forget to read all the information sheet in order to obtain a perfect operating of the module
OPERATING
The circuit's operating is very easy, nevertheless you have to remember following points Ê:
Firstly, the security code configuration . All CEBEK remote control works with a frequency adjusted at 433.92 Mhz. For this reason, they
include micro-switches (INT-0) allowing to configure a security code between 13.122 possibilities, for each module. Then, your module
will be different from others, even if they offer same characteristics.
To manipulate the micro-switches you have to open the emitter's enclosure. See the paragraph "To change battery" to correctly done
this operation.
The drawing corresponding to the micro-switches INT-0 shows 8 switches with threed ifferent positions:"-","0"and"+".
You have to modify the switches position that you have received in order to select you personal code . Don't forget. The receiver and
emitter to have the same segurity code configured to correctly work
When the security code is selected and all connection (for the receiver) are made, you have to press the push button and the receiver
will be connected. The indicator LED-1 will light during the button pressure indicating the emission. If the Led does not light, you have to
check the battery position (polarity) or the battery load level.
It is impossible to press both push button at the same time. If you wish to connect both output of the receiver consult "Output
configuration "paragraph in the receiver's instruction manual. You also have to consult instruction manual to control receiver with a single
output
REMOTE TRANSMITTER
TL-6
TECHNICAL CHARACTERISTICS
Voltage...............................................................12V.D.C.
Quiescent Consumption (without emission).... ..0mA.
Maximum Consumption(emitting)................. .....2,1mA.
Operating Frequency..........................................433.92Mhz.
Maximum Distance(Approx.)..............................30 Meters.
Battery Type........................................................A23-12V.
Sizes (Withouten closure)...................................50x32x15mm.
Sizes (With enclosure)........................................57x37x17mm.
.